Carrier OUTDOOR TEMPERATURE SENSOR TSTATCCSEN01 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TSTATCCSEN01
Outdoor Temperature Sensor
Installation Instructions
NOTE: Read the entire instruction manual before starting the PERFORMING THE INSTALLATION
installation.
Once the mounting location has been selected, route the intercon-
necting wiring through the building between thermostat and
SAFETY CONSIDERATIONS
outdoor sensor. The exit point from inside to outside will be the
Read and follow manufacturer instructions carefully. Follow all
location of the outdoor sensor. The location of the wi

ملخص المحتوى في الصفحة رقم 2

IFPLATEISATTACHEDDIRECTLYTOWALL:(SeeFig.2.) Drill a suitable hole through the wall at selected sensor location. Route sensor wires through wall, making sure they are accessible fromtheinside.Useprovidedspacerstostandoffplatefromwall. Mount the sensor plate loosely to wall with only 1 screw so that SENSOR access to hole is preserved for application of caulking. Fill hole with a suitable exterior caulking compound. Then insert second SPACERS EXTERIOR screw and tighten both screws carefully. WALL