ملخص المحتوى في الصفحة رقم 1
INSTALLATION MANUAL
VOICE SECURITY SYSTEM AI-900
Be sure to leave system installations, adjustments, and data settings to the dealer from whom
you have purchased.
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ..................................................................................... 4 2. FCC REQUIREMENTS ......................................................................................... 6 3. INDUSTRIAL CANADA REQUIREMENTS .................................................... 7 4. GENERAL DESCRIPTION .................................................................................. 8 5. FEATURES ...................................................
ملخص المحتوى في الصفحة رقم 3
12. WIRING 12.1. Wiring from the Station or Outside Line .............................................................. 21 12.2. Supplied Connector Connection ......................................................................... 22 12.3. AI-900MS Master Station Interface Card Connection 12.3.1. Master Station and AI-900MS connection .............................................. 23 12.3.2. External recording device and AI-900MS connection ............................ 25 12.4. AI-MS900 Master
ملخص المحتوى في الصفحة رقم 4
1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could r
ملخص المحتوى في الصفحة رقم 5
• Do not touch the power cord during thunder and [Applicable to the exchange] lightning, as this may result in electric shock. • Do not block the ventilation slots in the unit's cover. • Do not connect any power supply other than Doing so may cause heat to build up inside the unit specified to the AI-900MF's DC power input and result in fire. terminals. Doing so could result in fire or damage to the unit. When the Unit is in Use [Applicable to the exchange] CAUTION • Do not place heavy objects
ملخص المحتوى في الصفحة رقم 6
2. FCC REQUIREMENTS (1) The AI-900 complies with FCC Rules, Part 68. On this equipment is a label which contains, among other information, the FCC Part 68 registration number. (2) The ringer equivalence number (REN) is used to determine the quality of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be cert
ملخص المحتوى في الصفحة رقم 7
3. INDUSTRY CANADA REQUIREMENTS (1) ''NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment." (2) ''NOTICE: The Ringer Equivalence Number (RE
ملخص المحتوى في الصفحة رقم 8
4. GENERAL DESCRIPTION The AI-900 Security System is a voice communication system that permits calls to be quickly and easily made - even in emergency situations - with the touch of single button. The system can record conversations, and features external equipment sync output and operation log output. These features combine to make the AI-900 an ideal system for voice security applications. 5. FEATURES • Modular construction facilitates installation, maintenance, and system expansion. • Rack-
ملخص المحتوى في الصفحة رقم 9
7. SYSTEM CONFIGURATION AND EQUIPMENT FUNCTIONS 7.1. System Configuration AI-900 Exchange (1) Main Frame AI-900MF/ Main Frame Mounting Bracket AI-YC303 Master station AI-MS900 (2 units) Master Station Rack Mount Panel Interface Card Recording voice output (for each station) AI-PN100B AI-900MS (1) Recording control output (for each station) Power Transformer Telephone (2 units) Telephone Interface Uint AI-PU200 Card AI-900AL (2) Recording voice output (for each telephone) Power Transformer
ملخص المحتوى في الصفحة رقم 10
7.2. Equipment Functions • AI-900MF Main Frame The AI-900MF accommodates the following cards: Up to 2 AI-900MS or AI-900AL Cards (both cards may be mixed), up to 4 AI-900RS Cards, 1 AI-900CO Card, 1 AI-900AF Card, and 1 AI-900TI Card. The Main Frame has 2 RS-232C ports; one for programming and the other for operation log output. • AI-900MS Master Station Interface Card The AI-900MS is used for master station connection. Up to 2 master stations can be connected per card, and an external recordi
ملخص المحتوى في الصفحة رقم 11
8. AI-900MF MAIN FRAME NOMENCLATURE AND FUNCTIONS 1 2 3 12 10 4 11 5 9 6 7 8 1. AC Input Connectors 7.AI-900CO Installation Slot [CO] Connect to the AC output terminal of the One AI-900CO card can be installed. AI-PU200 power transformer unit. (See p. 32.) (See p. 39.) 8. AI-900AF Installation Slot [AF] 2. 24 V DC Input Connector One AI-900AF card can be installed. (See p. 34.) Connects to a battery (24 V DC). (See p. 39.) 9. AI-900TI Installation Slot [TI] 3. Power Switch One AI-900TI card ca
ملخص المحتوى في الصفحة رقم 12
9. INSTALLATION AND CONNECTION PROCEDURES (1) System Design Exchange/Station Configuration, Wiring Schedule and Station Numbering Schedule (2) Equipment Installation Installing the AI-900MF Main Frame in an Equipment Rack or on a Wall (See p. 13.) Installing the AI-PU200 Power Transformer in an Equipment Rack or on a Wall (See p. 15.) Installing the Substation (See p. 17.) Installing the Master Station (See p. 18.) (3) Installing a Card in the AI-900MF Main Frame Installing the Data Backup Bat
ملخص المحتوى في الصفحة رقم 13
10. EQUIPMENT INSTALLATION 10.1. AI-900MF Main Frame 10.1.1. Rack mounting Step 1. Attach the supplied rack mounting brackets to the frame. Machine screw M4x10 (6 places) Mounting bracket Step 2. Mount the frame to an equipment rack. Fiber washer (8 places) Rack mounting screw (tapping screw 5x12 , 8 places) 13
ملخص المحتوى في الصفحة رقم 14
10.1.2. Wall mounting (Optional AI-YC303 Wall Mounting Frame is required.) Step 1. Mount the AI-YC303 bracket to the wall. 78 78 78 55.2 Knockout (for wiring) 391.4 Wood screw 5.1x38 290 Mounting dimensions Step 2. Remove the AI-900MF's front panel, then mount the AI-900MF on the AI-YC303. Tapping screw 4x12 14 440.6 141.3 200 30
ملخص المحتوى في الصفحة رقم 15
10.2. AI-PU200 Power Transformer Unit 10.2.1. Rack mounting Step 1. Remove the 4 mounting screws, and attach the supplied wall mounting brackets to the transformer unit using the removed screws. Wall mounting bracket Mounting screw Step 2. Attach the AI-PU200 to the AI-PN100B Rack Mount Panel. AI-PN100B Machine screw (M3 x 8) AI-PU200 Step 3. Mount the AI-PN100B in an equipment rack. Note Perform terminal wiring before mounting. Fiber washer Binding head self tapping screw (5 x 12) 15
ملخص المحتوى في الصفحة رقم 16
10.2.2. Wall mounting Step 1. Remove the 4 mounting screws, and attach the supplied wall mounting brackets to the transformer using the removed screws. Wall mounting bracket Mounting screw Step 2. Mount the transformer to the wall using the supplied wood screws. 140 Unit: mm Wood screw 3.5 x 25 120 16 25 115
ملخص المحتوى في الصفحة رقم 17
10.3. AI-RS150, AI-RS160, AI-RS170 and AI-RS180 Substations Mount the substation to an electrical box mounted in the wall. 2-gang electrical box (deep) and adapter ring AI-RS150/-RS160/-RS170/-RS180 Oval head screw UNC No.6x18 Dimensional diagram Unit: mm 46 37 1 2 (AI-RS150) * 1 2 2 120 3 52.5 43.5 (AI-RS150) * * * 17 83.5 18.2 120
ملخص المحتوى في الصفحة رقم 18
10.4. Master Station 10.4.1. Desk-top mounting Connect the supplied modular-plug cord. 10.4.2. Wall mounting Pull out, rotate, and reset the cradle hook, then mount the station on the wall using the supplied wall mounting frame. Remove the cradle hook. 18
ملخص المحتوى في الصفحة رقم 19
11. AI-900MF CARD INSTALLATION 11.1. Backup Battery Installation Caution All cards contain many CMOS ICs which are easily damaged by static electricity. Do not touch circuit components. • Insert the backup battery into the Main Frame mother board before installing any cards. CR2032 BATT1 AI-900MF Battery replacement As the battery life is rated at about 4 years, replace it with a new one every 4 years. Follow the replacement procedure below. Step 1. Switch the Main Frame (AI-900MF) power off
ملخص المحتوى في الصفحة رقم 20
11.2. Card Installation Step 1. Remove each card from its static-protective bag, and install it in its designated position in the Main Frame. • For the AI-900TI, perform exchange number setting BEFORE installation. Refer to p. 38 "Exchange Number Setting." Step 2. After installing all cards, secure them using the supplied fixing bracket. The top and side panels are omitted to show the hidden parts. 20
