Makita ML900 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Rechargeable Flashlight
MODEL ML900
INSTRUCTION MANUAL
Power source Bulb Switch Dimensions Net weight
Makita battery cartridge 9000 9 6 V Rocker type 0 84 mm x 273 mm 260 g
(rechargeable Nc-cdl 500 mA ON-OFF (0 3-114" x 10 314") IO 6 Ibsl

ملخص المحتوى في الصفحة رقم 2

Installing or removing battery cartridge NOTE : Before operation, charge the battery cartridge with Makita 9.6V Fast charger. To insert the battery cartridge, pull out the set plate, align the tongue on the battery cartridge with the groove in the flashlight handle and slip it into place. Snap the set plate back into place. Be sure to close the set plate fully before using the flash- light. Switch action To turn the flashlight on, press the "ON" side of the switch. Press the "OFF"

ملخص المحتوى في الصفحة رقم 3

MAINTENANCE CAUTION : Always be sure that the flashlight is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. Replacing light bulb I Turn the ring counterclockwise and remove the ring, reflector and bulb together. Pull the bulb holder out of the reflector. Pull the bulb out of the bulb holder after turning the bulb slightly clockwise. To install a new bulb, follow the re- moval procedure in reverse. There Bulb holder are three

ملخص المحتوى في الصفحة رقم 4

Cleaning Use a cloth dampened in a mild detergent to clean off the flashlight from time to time. Then wipe dry with a dry cloth. Benzine, thinner and other so never use them. volatile agents will damage the plastic, To maintain product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be perfomed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES The accessories listed in this manual are available at an extra cos