ملخص المحتوى في الصفحة رقم 1
AEROBICS AND VOCAL
HEADSET MICROPHONE
PM4 PHANTOM POWER ADAPTOR
OWNERS MANUAL
QE AEROBICS MIC
QV VOCAL MIC
PM4 Phantom
power adaptor
®
ملخص المحتوى في الصفحة رقم 2
© Copyright 1998 Samson Technologies Corp.
ملخص المحتوى في الصفحة رقم 3
CONTENTS INTRODUCTION 4 FEATURES 6 USING YOUR QE/QV HEADSET 8 SPECIFICATIONS 14 3
ملخص المحتوى في الصفحة رقم 4
INTR ODUCTION Thank you for purchasing the Samson QE/QV Headset Microphone with the PM4 phantom power adaptor. These professional hands-free microphones are specially designed for performing musicians and dancers, sportscasters and aerobics instructors (the QE model is water resistant and is optimized for aero- bics use and high-humidity environments). Manufactured with extreme care and the highest quality components, they deliver an exceptionally clear, articulate sound, with superior rejection
ملخص المحتوى في الصفحة رقم 5
INTR ODUCTION Should your QE/QV Headset or PM4 ever require servicing, a Return Authorization number (RA) must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please retain the original packing material and, if possible, return the QE/QV Headset in its original carton and packing materials. Samson Technologies Corp. 575 Underhill
ملخص المحتوى في الصفحة رقم 6
FEATURES The Samson QE/QV Headset utilizes state-of-the-art headset microphone tech- nology and is engineered to the finest detail. Here are some of its main features: • Lightweight, low visibility design for unobtrusive use. • High quality electret condenser element delivers high output and exceptional sound quality. • Full range frequency response for clear, crisp audio. The QV Headset is vir- tually flat to 10kHz, while the QE Headset utilizes a midrange “presence” peak for optimum reproducti
ملخص المحتوى في الصفحة رقم 7
FEATURES • Microphones are molded to high quality gooseneck booms constructed of brass over stainless steel wire with matt black polyurethane covering. Compliant molding reduces microphone handling noise, and the booms bend smoothly, hold their shape and are rated to withstand over a thousand 90° bends without degrading. • Both the QV and QE Headsets are moisture protected, and the QE is water resistant, making it the microphone of choice for aerobics instruction or in other high-humidity enviro
ملخص المحتوى في الصفحة رقم 8
SAMSON SAMSON QE QV USING YOUR QE/QV HEADSET As shown in the illustrations below, the correct way to wear your QE/QV Headset is over the ears, as you would wear a pair of eyeglasses. The QE/QV Headset is specially designed to be used up close, so be sure to adjust the microphone to be directly in front of your lips, as shown in these illustra- tions. Although it generates significantly less handling noise than most other head- sets (due to its compliant molding), it should be left in one positio
ملخص المحتوى في الصفحة رقم 9
USING YOUR QE/QV HEADSET Slide the foam windscreen over the microphone ,as shown in the illustration on the previous page, to eliminate wind noise. The PM4 phantom power adaptor with its special interface, enables a mixer to provide phantom power to condenser, piezo or electric microphones. The PM4 converts high impedance (50 k – 10meg ohm) to low impedance (600 ohms) allowing long cable runs without noise and gain loss. Connect the P3 plug from your QE/QV Headset into the locking input of the P
ملخص المحتوى في الصفحة رقم 10
USING YOUR QE/QV HEADSET Every microphone has a characteristic polar pattern that determines how well it accepts or rejects signals coming from various areas around the microphone. A type of design which is particularly good at rejecting background noise is the bi-directional polar pattern uti- 0° lized by the QE Headset, as shown in the illustration on the -10dB left. -20dB 90° 270° QE Headset Polar Pattern (measured at 1 kHz) 180° 10
ملخص المحتوى في الصفحة رقم 11
USING YOUR QE/QV HEADSET Omnidirectional mics accept all signals regardless of wherever those signals originate (in front of the mic, behind it, to the side, etc.). In contrast, directional cardioid mics are specifically designed to accept mostly signals coming from directly in front, and to reject 0° signals coming from behind or from the side. The most extreme variation of cardioid is -10dB the hypercardioid pattern uti- lized by the QV Headset (as -20dB shown in the illustration on the right)
ملخص المحتوى في الصفحة رقم 12
dB (re 1 Volt/Pascal) USING YOUR QE/QV HEADSET In the QE Headset, three noise cancelling modes operate together to provide 20 - 30 dB of noise reduction: First, the small size of the mic capsule and the short distance between front and rear ports reduces the sensitivity at 1 kHz to far field noise by 15 dB compared to the close talking response. Secondly, as shown in the frequency response graph below, noise at lower frequencies is additionally attenuated. And, -55 -35 finally, the bi-directiona
ملخص المحتوى في الصفحة رقم 13
dB (re 1 Volt/Pascal) USING YOUR QE/QV HEADSET Because of their polar patterns, frequency response, and noise cancellation design, both the QV and QE Headsets excel in environments where there is a good deal of unwanted ambient sound—they deliver those sig- -60 -40 0° nals originating directly in front of the mic capsule itself while -50 -70 rejecting those that originate from other directions. -80 -60 The polar pattern also deter- 125° mines how prone a particular mic is to inducing feedback. 1
ملخص المحتوى في الصفحة رقم 14
SPECIFICATIONS QE and QV Generating Element: Back electret condenser Polar Pattern QE (water-resistant): Bi-directional noise cancelling, QV: Hypercardioid pressure gradient type Mounting system: Adjustable headband and gooseneck Sensitivity QE: 80 mV @ 114 dB SPL QV: 70 mV @ 114 dB SPL Max.SPL: 145 dB Weight: 1.92 oz. • 54.4 grams 14
ملخص المحتوى في الصفحة رقم 15
SPECIFICATIONS PM4 (For use with QE/QV Headset Mics) Frequency Response (+-0, 1.5dB): 20Hz—20kHz Connectors Input: TA3M Switchcraft Output: XLR Male (gold plated) Operating Voltage: 12 Vdc through 48 Vdc Impedance (@ 1kHz nominal) Input: 2kΩ Output: 600Ω balanced (transformer coupled) Input Wiring Pin 1: GND Pin 2 Audio Pin 3: + Phantom Output Wiring Pin 1: GND Pin 2 Hot + Pin 3: Cold – Casing: Zinc, die cast Stainless steel belt clip Dimensions Length: 3.7″ • 93.75mm Diameter: 0.86 • 22mm 15
ملخص المحتوى في الصفحة رقم 16
SPECIFICATIONS FRONT VIEW FRONT VIEW .95″ 1″ 24mm 26mm FLEXIBLE GOOSENECK FLEXIBLE GOOSENECK .4″ / 10mm .47″ / 12mm .24″ / 6mm .35″ / 9mm 11″ / 278mm 8.5″ / 220mm REAR VIEW REAR VIEW FLEXIBLE CABLE FLEXIBLE CABLE FLEXIBLE SHIELD SHIELD (-) WHITE (—) WHITE (—) RED (+) RED (+) QV Dimensions QE Dimensions 16
ملخص المحتوى في الصفحة رقم 17
SPECIFICATIONS Q'TY 3.72″ / 94.5mm MODEL PM-4 Q'TY 1 NO DESCRIPTION SPECIFICATION 2.84″ / 72mm 1 RECEPTACLE ASS'Y TB3M 1 7 2 SET SCREW M2x2 1 SET SCREW SCREW 1 3 4 CLIP M2xL4(F/H) 2 5 3P CONNECTOR ASS'Y CLIP 1 .875″ / 22.25mm .75″ / 19mm CONNECTOR HOLDER 1 6 CASE SCREW SC GOLD 1 7 8 TRANS 1 PCB 2 9 10 CASE 1 1 2 3 4 5 6 8 9 10 7 PM4 PHANTOM MICROPHONE ADAPTER FOR USE WITH QE AND QV HEADSETS PM4 Mechanical 18VDC TO 48VDC 17
ملخص المحتوى في الصفحة رقم 18
SPECIFICATIONS 1 PATTERN 2 SILK PRINT 3 TB3M XLR3 3 Trans 3 ORN C5 R4 D1 RED 1 Trans C4 R1 Q1 D2 WHT 2 TB3M Trans 4 C3 R2 R3 C2 C1 2 Trans BLK PM4 1 TB3M XLR3 1 TB3M XLR3 Trans YEL RED Trans 5 2 1 3 2 3 BLK 3 1 1 4 GRN BLU 2 5 PM4 Circuit board 18
ملخص المحتوى في الصفحة رقم 19
Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 1-516-364-3888 www.samsontech.com
