ملخص المحتوى في الصفحة رقم 1
User guide for the Nokia Bluetooth
Headset (HS-37W)
9238645
ملخص المحتوى في الصفحة رقم 2
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HS-37W is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. Copyright © 2005 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission
ملخص المحتوى في الصفحة رقم 3
Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. 9238645
ملخص المحتوى في الصفحة رقم 4
Contents 1. Introduction...................................................................................................... 5 Bluetooth wireless technology ............................................................................................................... 5 2. Get started ........................................................................................................ 7 Insert the battery.......................................................................................
ملخص المحتوى في الصفحة رقم 5
1. Introduction Read this user guide carefully before using the headset. Read also the user guide for your phone, which provides important safety and maintenance information. Keep the headset out of reach of small children. The Nokia Bluetooth headset HS-37W is designed for all-day wear, and provides up to 15 hours of talk time with a single AAA battery. This device is intended for use when supplied with power from a 1.5 V LR03 / AAA Alkaline battery. The use of any other types may invalidat
ملخص المحتوى في الصفحة رقم 6
The HS-37W headset is compliant with the Bluetooth Specification 1.2 supporting the following profiles: Headset Profile and Handsfree Profile. Interoperability between the HS-37W headset and other Bluetooth-enabled products is not guaranteed. Check with the manufacturers of other devices to determine their compatibility with this device. Copyright © 2005 Nokia. All rights reserved. 6
ملخص المحتوى في الصفحة رقم 7
2. Get started There may be restrictions on using Bluetooth wireless technology in some locations. Check with your local authorities or service provider. The headset contains the following parts: • Answer/end key (1) Yellow light indicator (LED) (2) Earpiece (3) Battery compartment (4) Volume key (5) Before you can start using the headset, you must insert a battery, and pair a compatible phone with the headset. Copyright © 2005 Nokia. All rights reserved. 7
ملخص المحتوى في الصفحة رقم 8
■ Insert the battery Open the battery compartment by sliding the battery panel off, and insert the battery. ■ Pair the headset with a compatible phone The HS-37W headset goes into the pairing mode when you insert or replace the battery. The yellow LED lights up and remains on for 5 minutes, during which the headset can be paired to a compatible mobile phone. 1. Set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 2. When your phone finds the HS-37
ملخص المحتوى في الصفحة رقم 9
If the pairing was unsuccessful, the yellow LED stays on for 5 minutes, during which you must pair the devices again. You only need to pair the headset with your phone once. To exit the pairing mode, press the answer/end key briefly. You are now ready to use the headset. Copyright © 2005 Nokia. All rights reserved. 9
ملخص المحتوى في الصفحة رقم 10
3. Basic use ■ Call handling To answer a call with your mobile phone, press the answer key on your phone. You can transfer the call to the headset by pressing the answer/end key on the headset briefly. To answer a call with the headset, press the answer/end key on the headset briefly. There may be a slight delay in transfering the call from the mobile phone to the headset. To avoid missing calls, it is recommended that you answer calls with your mobile phone, and then transfer the call to t
ملخص المحتوى في الصفحة رقم 11
To end a call, press the end key on your mobile phone or the answer/end key on your headset. ■ Standby mode To maximise the battery life, the headset automatically switches off after each call. To prevent this, set the headset in the standby mode. The standby mode speeds up the connection to your mobile phone, but reduces battery life. To activate the standby mode, press and hold the volume and answer/end keys for 5 seconds. To switch the headset on in the standby mode, press the answer/end
ملخص المحتوى في الصفحة رقم 12
■ Store the headset Always store the headset with the power off and safely protected. Avoid storage in high temperatures (above 45°C / 113°F) - such as direct sunlight. Storage in high temperatures can degrade performance and reduce the battery life. Low temperatures (down to -10°C / 14°F) shorten the battery life and may affect operation. Do not expose the headset to rain or other liquids. ■ Troubleshooting The audio quality is poor Check that the headset is within a maximum of 10 meters fro
ملخص المحتوى في الصفحة رقم 13
Cannot answer calls with the headset because the phone stops ringing before the headset is activated The headset is designed to maximise battery life by automatically switching off after a call. The standby mode speeds up the connection between your phone and the headset, see Standby mode, 11. I have pairing problems even though my phone indicates otherwise You may have deleted the headset pairing in your mobile phone. Pair the devices again. Copyright © 2005 Nokia. All rights reserved. 13
ملخص المحتوى في الصفحة رقم 14
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. Keep all accessories and enhancements out of the reach of small children. Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before
