Audio-Technica BPHS1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

BPHS1
broadcast & production microphones
Broadcast Stereo Headset
Experiment with placement for optimal performance: Positioning the
microphone closer to your mouth will increase the low-end response for
a more robust, full-range sound. As you move the microphone away from
your mouth, the low-end response will diminish.
To remove included 3.3 m (10.8') shielded cable, loosen and remove the
thumb screw and pull the multi-pin connector out of its socket. To replace
the cable, plug the multi-

ملخص المحتوى في الصفحة رقم 2

BPHS1 Specifications Headphone type Closed-back dynamic Headphone driver 40 mm, neodymium magnet, copper-clad aluminum wire voice coil Microphone element Dynamic Microphone polar pattern Cardioid Frequency response Headphone: 20-20,000 Hz Microphone: 40-20,000 Hz Open circuit sensitivity –57 dB (1.4 mV) re 1V at 1 Pa (microphone) Sensitivity 100 dB (headphone) Maximum input power 1,600 mW at 1 kHz Impedance Headphone: 65 ohms Microphone: 560 ohms Weight 264 g (9.3 oz) Dimensions 82.0 mm (3.23