Snapper 4273 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Bumper Kit
Installation
Mfg. No. 1694923
Instructions
3 Kit Contents:
Ref. Part No. Qty. Description
2
1 1731989A 1 Bumper Assembly
2 1931277 4 Nut, Hex, Flange Lock, 5/16-18
3 3 1930591 4 Capscrew, Flange Lock,
2
5/16-18 x 3/4
1
Figure 1. Contents
This kit is to install a bumper onto a Regent / 500 /
2500 / LT-200 Series Lawn Tractor.
A
A
WARNING
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
B
and disconnect the spark plug wire(s).
Kit Insta

ملخص المحتوى في الصفحة رقم 2

Installation Instructions Bumper Kit BUMPER INSTALLATION 1. Insert 5/16-18 x 3/4 capscrew (D, Figure 4) through the holes in hinge (B) and the holes in bumper assembly (A). 2. Connect the 5/16-18 locknut (C) to 5/16-18 x 3/4 cap- D screw (D). Do not tighten at this time. 3. Repeat steps 1 and 2 for all four holes in bumper assembly (A) and hinges (B). 4. Tighten all hardware. C B A Figure 4. A. Bumper Assembly B. Hinges C. Locknuts, 5/16-18 D. Capscrews, 5/16-18 x 3/4 HOOD INSTALLATION 1. Se