ملخص المحتوى في الصفحة رقم 1
HI-203E HI-203E
Mini-DIN Mini-DIN
GPS Receiver GPS Receiver
User Manual
ملخص المحتوى في الصفحة رقم 2
HI-203E HI-203E GPS Receiver GPS Receiver 1
ملخص المحتوى في الصفحة رقم 3
General description of what GPS is and how it works. GPS (Global Positioning System) is the only system today able to show you your exact position on the Earth anytime, in any weather, anywhere. GPS satellites, 24 in all, orbit at 11,000 nautical miles above the Earth. They are continuously monitored by ground stations located worldwide. The satellites transmit signals that can be detected by anyone with a GPS receiver. Using the receiver, you can determine your location with great preci
ملخص المحتوى في الصفحة رقم 4
Although GPS was designed for military use, many thousands of civi lians make use of it. The satellites actually broadcast two signals, one is only formilitary use, and the ther can be used by both military and civilians. Since GPS is passive (you only need to receive the signal), there are no restrictions on who can use the signal available to civilians. GPS technology can be used in a variety of fields besides providing navigation for vehicles on the sea, in the air and on the ground. G
ملخص المحتوى في الصفحة رقم 5
GLOBAL POSITIONING SYSTEM HI-203E GPS RECEIVER Pin Assignment 1800±30mm Connectors 1 1 3 5 2 2 4 6 PS/2 Connector 1 Function Mini Din: 6 pin male Color CN1 Green TX 5 connector White 4 RX 2 Red VCC 2 Wire: 3.6 ± 0.1mm Black GND 1 4
ملخص المحتوى في الصفحة رقم 6
Pocket PC HI-203E PS/II GPS receiver Can Connecting to a female PS/II Connector. One end from the female Connector is +12V car charger (charging PDA and GPS receiver simultaneously) the other end form the female PS/II connector is the PDA connector for connecting your PDA. For notebook PC use: HI-203E PS/II can also connect with a PS/II to DB9 PS-232 serial cable or USB connector. 5
ملخص المحتوى في الصفحة رقم 7
1. HI-203E Series Introductions HI-203E is a GPS receiver with PS/II mini-DIN interfaces and built-in active antenna for high sensitivity to tracking signal. HI-203E is well suited to system integration and users who use any kinds of mobile devices, such as, PDA, notebook PC, Tablet PC, etc. It satisfies a wide variety of applications for car navigation, personal navigation or touring devices, tracking and marine navigation purpose. Users can simply plug it into a PDA or other type of
ملخص المحتوى في الصفحة رقم 8
Optional Accessories: • PS/II to PDA connector and car charger • PS/II to DB9 adapting cable • PS/II to USB adapting cable HI-203E-USB HI-203E-XXXX (Pocket PC Plug) HI-203E-DB9 7
ملخص المحتوى في الصفحة رقم 9
SECTION 1 INTRODUCTION 1.1 OVERVIEW 12 Channel GPS Sensor Module The HI-203E is an all-in-one GPS receiver module specifically designed for handheld device market. It features small size, low power consumption, and ease of use. The HI-203E is optimized for good performance and low cost. Its 12 parallel channels and 4000 time/frequency search bins provide very fast signal lock-on and rapid time to first fix. Having much faster satellite signal acquisition and re-acquisition speed than the
ملخص المحتوى في الصفحة رقم 10
1.2 Features • 12 parallel channel GPS receiver • 4000 simultaneous time-frequency search bins • Better than -135dBm sensitivity • < 10 second hot start • < 45 second cold start • 5m CEP accuracy 9
ملخص المحتوى في الصفحة رقم 11
SECTION 2 RECEIVER OPERATION Upon power up, after initial self-test has completed, the HI-203E will begin satellite acquisition and tracking process. Under normal open-sky condition, position-fix can be achieved within approximately 35 seconds (within 10 seconds if valid ephemeris data is already collected from recent use). After receiver position has been calculated, valid position, velocity and time information are transmitted through the on board serial interface. The receiver uses the
ملخص المحتوى في الصفحة رقم 12
As soon as GPS signal is acquired and tracked, the HI-203E will transmit valid navigation information through its serial interface. The navigation data contains following information: • Receiver position in latitude, longitude, and altitude • Receiver velocity • Time • DOP error-magnification factor • GPS signal tracking status The HI-203E will perform 3D navigation when four or more satellites are tracked. When three or fewer satellites are tracked, altitude-hold is enabled using the last
ملخص المحتوى في الصفحة رقم 13
2.1 TECHNICAL SPECIFICATIONS FEATURES DESCRIPTIONS Receiver Type 12 parallel channel, L1 C/A code Accuracy Position: 5m CEP Velocity: 0.1m/sec Startup Time < 10sec hot start < 35sec warm start < 45sec cold start Reacquisition 1s Acquisition Sensitivity Better than -135dBm Update Rate 1Hz Dynamics 4G (39.2m/sec2) Operational Limits Altitude < 18,000m or velocity < 515m/s (COCOM limit, either may be exceeded but not both) Serial Interface LVTTL level and RS-232 level Protocol NMEA-0183 V
ملخص المحتوى في الصفحة رقم 14
SECTION 3 HARDWARE INTERFACE 3.1 MECHANICAL DIMENSIONS Unit:mm Top View 41±0.2 I/O Cable Lateral View 20±0.2 I/O Cable LED indicator Bottom View 41±0.2 I/O Cable CPU 58±0.2 13
ملخص المحتوى في الصفحة رقم 15
pin-1 HI-203E Lateral View 3.2 PINOUT DESCRIPTION Pin Number Signal Name Description Asynchronous serial 1 Serial Data Out 1 output at LVTTL level, to output NMEA message Asynchronous serial 2 Serial Data In 1 input at LVTTL level, to input command message Asynchronous serial 3 Serial Data Out 2 output at RS-232 level, to output NMEA message Asynchronous serial 4 Serial Data In 2 input at RS-232 level, to input command message 5 Power 3.8V ~ 12.0V DC input 6 Ground Power and signal groun
ملخص المحتوى في الصفحة رقم 16
3.3 ONE-PULSE-PER-SECOND (1PPS) OUTPUT The one-pulse-per-second output is provided for applications requiring precise timing measurements. The output pulse is 1usec in duration. Rising edge of the output pulse is accurate to +/-1usec with respect to the start of each GPS second. Accuracy of the one-pulse-per-second output is maintained only when the GPS receiver has valid position fix. The 1PPS output is always generated when the GPS receiver is powered-on. Proper adjustment of the 1PPS
ملخص المحتوى في الصفحة رقم 17
As long as enough satellite signals are received to generate valid position fixes, the 1PPS output remains synchronized to the GPS second, and the 1PPS Valid Signal remains active. If signal blockage prevents the receiver from generating valid position fix, the 1PPS output will drift away from the GPS second and the 1PPS Valid Signal will become inactive. Upon re-acquiring enough satellites to generate consecutive valid position fixes, the 1PPS Valid Signal will become active again, sign
ملخص المحتوى في الصفحة رقم 18
SECTION 4 SOFTWARE INTERFACE This section describes the details of the serial port commands through which the HI-203E is controlled and monitored. The serial port commands allow users to set the receiver parameters, configure output message type, and retrieve status information. The baud rate and protocol of the host COM port must match the baud rate and protocol of the GPS receiver serial port for commands and data to be successfully transmitted and received. The default receiver protoc
ملخص المحتوى في الصفحة رقم 19
4.1.1 NMEA Messages The serial interface protocol is based on the National Marine Electronics Association's NMEA 0183 ASCII interface specification. This standard is fully define in "NMEA 0183, Version 3.01" The standard may be obtained from NMEA, www.nmea.org 4.1.2 GGA - GPS FIX DATA Time, position and position-fix related data (number of satellites in use, HDOP, etc.). Format: $GPGGA,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>, M,<10>,M,<11>,<12>,*<13> Example: $GPGGA,104549.04,2447.203
ملخص المحتوى في الصفحة رقم 20
Field Example Description 1 104549.04 UTC time in hhmmss.ss format, 000000.00 ~ 235959.99 2 2447.2038 Latitude in ddmm.mmmm format Leading zeros transmitted 3 N Latitude hemisphere indicator, 'N' = North, 'S' = South 4 12100.4990 Longitude in dddmm.mmmm format Leading zeros transmitted 5 E Longitude hemisphere indicator, 'E' = East, 'W' = West 6 1 Position fix quality indicator 0: position fix unavailable 1: valid position fix, SPS mode 2: valid position fix, differential GPS mode 7
