ملخص المحتوى في الصفحة رقم 1
®
rino 600 series
owner’s manual
ملخص المحتوى في الصفحة رقم 2
© 2011 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. ® ® ® ® Garmi
ملخص المحتوى في الصفحة رقم 3
Table of Contents Tracks 16 Table of Contents Navigating a Saved Track17 Getting Started ������������������������3 Navigation �����������������������������18 Keys3 Navigating to a Destination18 Manual Conventions 4 Map19 Battery Information 4 Compass 19 Acquir
ملخص المحتوى في الصفحة رقم 4
Table of Contents Map Settings29 Viewing Device Information 39 Tracks Settings 30 Specifications 39 Changing the Units of Measure 31 About the Batteries 40 Time Settings 31 Caring for the Device 41 Position Format Settings 32 Data Management 42 Heading Settings 32
ملخص المحتوى في الصفحة رقم 5
Getting Started Keys Getting Started WaRNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. ➊ When using your device the first time, you should complete the following ➋ tasks to set up the device and get to ➌ know the basic features. 1. Install the batteries (page 4). 2. Register the device (page 6). 3. Acquire satellites (page 6). 4. Set up the radio (page 9). 5. Mark a waypoint (page 15). Key Descriptio
ملخص المحتوى في الصفحة رقم 6
Getting Started Installing the Lithium-ion Hold to turn on or off ➋ the device Select to Battery adjust backlight, volume, note: The lithium-ion battery pack ® squelch level, and to lock can be used only with the Rino 650 or unlock the screen and 655t. Hold to talk PTT stands ➌ 1. Locate the battery pack ➊ that for push-to-talk came in the product box. Manual Conventions All the pages are found on the home screen. Use or to scroll through the pages. The small arrows (>) used in
ملخص المحتوى في الصفحة رقم 7
Getting Started 4. Turn the D-ring clockwise. Charging the Lithium-ion ➊ Battery Before you use the device the first time, charge the battery. Charging a fully depleted battery takes 6 hours. The device will not charge 4. Charge the device completely. when outside the temperature range from 32°F to 113°F (from 0°C to A fully charged battery can run for 45°C). up to 14 hours before it must be recharged. 1. Plug the AC charger into a standard wall outlet. Installing aa Batteries 2. Lif
ملخص المحتوى في الصفحة رقم 8
Getting Started 2. Lift the latch on the cover to 3. Wait while the device searches for separate the battery compartment. satellites. 3. Insert four AA batteries, observing A question mark flashes while the polarity. device determines your location. The GPS bars indicate satellite strength. When the bars are green, the device has acquired satellite signals. Registering Your Device • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. 4. Replac
ملخص المحتوى في الصفحة رقم 9
Getting Started adjusting the Backlight Brightness The backlight levels vary for the different power sources. For example, the highest backlight setting while running on AA batteries is lower than the highest while running on the lithium-ion battery. This is to extend the AA battery life. 1. While the device is on, select . 2. Use + and - to adjust the brightness level. Locking the Screen note: This action does not lock the keys. 1. Select . 2. Select Lock Screen. Rino 600 Series Owner
ملخص المحتوى في الصفحة رقم 10
Radio Muting the Radio Radio 1. Select . The radio page provides the user 2. Select Volume. interface for Family Radio Service (FRS) and General Mobile Radio Choosing a Channel Service (GMRS) radio operations. 1. Select Radio > Channel. 2. Use + or - to select a channel. about the Radio The Rino has a total of 30 channels and Scanning Channels 121 squelch codes. You can scan the channels for voice activity. Frequency Channel Select Radio > Scan. 1-7 GMRS and FRS channels Setting Up a
ملخص المحتوى في الصفحة رقم 11
Radio • Squelch t one Mode: Monitoring for activity You can monitor a single channel for ◦ CtCSS —Continuous Tone any activity, including static and weak Controlled Squelch System voice signals. This is helpful if a signal allows you to ignore unwanted is going out of range. calls from persons using the same channel. Select Radio > Monitor. ◦ DCS—Digital-Coded Squelch allows you to ignore unwanted Radio Settings calls from persons using the Select > Setup Radio. same channel. • Sen
ملخص المحتوى في الصفحة رقم 12
Radio • Vox Level—Voice operated Viewing Contacts on the Map transmission controls the sensitivity 1. Select Contacts. level of any Vox accessory. 2. Select a contact. 3. Select View Map. about Contacts The first time a signal is received from Notes another Rino user, the new contact note: Notes transmit to all users on page appears. From that page, you your current channel and code. can show their location on the map, navigate to their location (page 21), or You can send notes to other
ملخص المحتوى في الصفحة رقم 13
Radio • Select Send note to send Enabling Peer-to-Peer without saving. Positioning Select Setup > Radio > Send • Select Save. Location > on. • Select Send and Save. Sending a Location Sending a Favorite Note Before you can send a location, you 1. Select notes > . must enable peer-to-peer positioning 2. Select a note to send. (page 11). 3. Select Send note. 1. Select Share Wirelessly > Send. 2. Select Use FRS/GMRS. about Peer-to-Peer 3. Select a category. Positioning note: Locat
ملخص المحتوى في الصفحة رقم 14
Radio Viewing SaME Weather alerts Using SaME Weather on the Map alerts When you receive a SAME weather note: SAME weather alerts are alert, a message appears containing the available in the US only on the Rino alert information. The device shows 650 and 655t. your county map with color-coded SAME (Specific Area Message watches and warnings. Encoding) weather alerts allow you to Select Weather Map to view the receive county weather alerts on your weather alert on the map. device. You
ملخص المحتوى في الصفحة رقم 15
Radio Radio Page Status Receiving The device is weather receiving a weather Indicators broadcast Message Description Activity on A signal is being Radio Status Description channel received, but does Radio -- Radio feature is off not match the current Radio 1/2W Transmit power at code 1/2 watts FRS Radio Off The 2-way radio is channels transmit on turned off this level only Ready to FRS channel is Radio 1W Transmit power at transmit of selected and the 1 watts FRS device can
ملخص المحتوى في الصفحة رقم 16
Radio Status Bar Description The radio is on The radio is receiving The radio is transmitting Peer-to-peer is enabled and is ready to transmit the position Weather alert is turned on The radio is muted (page 8) 14 Rino 600 Series Owner’s Manual
ملخص المحتوى في الصفحة رقم 17
Waypoints and Tracks 5. Select . Waypoints and Tracks Deleting a Waypoint Waypoints 1. Select Waypoint Manager. Waypoints are locations you record and 2. Select a waypoint. store in the device. 3. Select Delete Waypoint. Creating a Waypoint Increasing the accuracy of a You can save your current location as Waypoint Location a waypoint. Waypoint averaging allows you to increase the accuracy of a waypoint Select Mark Waypoint. location by collecting multiple samples Finding a Waypoint of t
ملخص المحتوى في الصفحة رقم 18
Waypoints and Tracks Managing Track Log Recording about Sharing Data 1. Select Setup > t racks > t rack Your device can send or receive data Log. when connected to another compatible device. You can share waypoints, 2. Select Record, Do not Show or geocaches, routes, and tracks. Record, Show on Map. If you select Record, Show on Sending and Receiving Data Map, a line on the map indicates Wirelessly your track. Before you can share data wirelessly ™ 3. Select Record Method. using ANT+ wi
ملخص المحتوى في الصفحة رقم 19
Waypoints and Tracks note: Using the Most often • Select Save Portion, and select interval provides the most track a portion. detail and fills up the device Clearing the Current Track memory quicker. Select Setup > Reset > Clear Viewing the Current Track Current t rack > Yes. The track being recorded is called the Deleting a Track current track. 1. Select t rack Manager. 1. Select t rack Manager > Current 2. Select a track. t rack. 3. Select Delete > Yes. 2. Select an option: • To show th
ملخص المحتوى في الصفحة رقم 20
Navigation 2. Select an item you want to search Navigation near. 3. Select Use. Navigating to a 4. Navigate using the map (page 19) Destination or compass (page 19). You can use the Where To? menu to ® find a destination to navigate to. Not all Starting a TracBack Where To? categories are available in You can navigate back to the beginning all areas and maps. of a track. This can be helpful when finding your way back to camp or the 1. Select Where t o?. trail head. 2. Select an item
