ملخص المحتوى في الصفحة رقم 1
GPS 10x
TECHNICAL
SPECIFICATIONS
®
Garmin International, Inc.
st
1200 E. 151 Street
Olathe, KS 66062 USA
190-00769-00, Revision A
December 2006
ملخص المحتوى في الصفحة رقم 2
© Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. st 1200 East 151 Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Tel. 44/0870.8501241 (outside the UK) 0808 2380000 (inside the UK) Fax 44/0870.8501251 Garmin Corporation nd No. 68, Jangshu 2 Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 All
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS 1 Introduction..................................................................................................................1 1.1 Cautions............................................................................................................................................1 1.2 Limited Warranty..............................................................................................................................2 1.3 Overview..................................
ملخص المحتوى في الصفحة رقم 4
Appendix A: Binary Phase Output Format ..................................................................13 Appendix B: GPS 10x and Windows Serial Mouse Issue.............................................17 Appendix C: Sensor Configuration Software ...............................................................19 Downloading the Sensor Configuration Software............................................................................................19 Selecting a Model.........................
ملخص المحتوى في الصفحة رقم 5
1 INTRODUCTION 1.1 CAUTIONS CAUTION The GPS system is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. Although the GPS 10x is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted, and therefore become unsafe. Use these products at your own risk. To reduce the risk, carefully review and understand all aspects of these Technical Specifications before using the GPS 10x. When in actual use,
ملخص المحتوى في الصفحة رقم 6
1.2 LIMITED WARRANTY This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident, or
ملخص المحتوى في الصفحة رقم 7
1.3 OVERVIEW TM The GPS 10x product is a high sensitivity SiRFstarIII GPS receiver with WAAS capability, a removable rechargeable lithium-ion battery, and Bluetooth ® wireless technology capability. The GPS 10x tracks up to 12 satellites at a time while providing fast time-to-first-fix, one-second navigation updates, and low power consumption. This generation of GPS sensors adds the capability of FAA Wide Area Augmentation System (WAAS) differential GPS. The GPS 10x’s far-reaching capabilit
ملخص المحتوى في الصفحة رقم 8
1.4.1 GPS 10x Wireless Receiver The GPS 10x uses Bluetooth ® wireless technology to interface with a mobile device (Computer/PDA) that is Bluetooth wireless technology enabled. Class 2 Bluetooth device with power control capability based on the Bluetooth System Specification, Version 1.1. The supported profile is Serial Profile (SSP). Accessories provided with the GPS 10x: • 12 VDC Cigarette Lighter Charging Adapter with Mini B-USB Connector (010-10563-00) DC Charging Adapte
ملخص المحتوى في الصفحة رقم 9
1.5.2 Electrical Characteristics 1.5.2.1 Input Voltage 4.5–5.5 V 1.5.2.2 Input Current 500mA @ 5.0 V 1.5.2.3 Battery • Capacity: 1100 mAHr • Charging rate: Approx. 4 Hrs • Operating time: Approx. 22 Hours with WAAS enabled. 1.5.2.4 Battery Charger The included Cigarette Lighter Adapter (010-10563-00) can be used to charge the GPS 10x’s internal battery 1.5.3 Environmental Characteristics 1.5.3.1 Operating Temperature Range • -30°C to + 60°C Powered from external supply
ملخص المحتوى في الصفحة رقم 10
1.5.5 Interfaces 1.5.5.1 GPS 10x Electrical Characteristics • Communicate with Host Platform via Bluetooth Serial Profile • Typical Range: up to 32 feet (10 meters) 1.5.5.2 Garmin Interface Refer to the Garmin Device Interface Specification for specific information about the Garmin Protocol. The document is located on the Garmin Web site at http://www.garmin.com/support/ commProtocol.html. See also Appendix A: Binary Phase Output Format for additional information concerning access to ra
ملخص المحتوى في الصفحة رقم 11
2 MECHANICAL CHARACTERISTICS & MOUNTING Figure 1 shows the operational characteristics of the GPS 10x. Figure 2 shows the auxiliary power plug dimensions. Power Plug Specifications for charging the GPS 10x from user provided power source: Mini- USB connector (Range 4.5 to 5.5 VDC @ 500 mA) Figure 1. GPS 10x Operational Characteristics Bluetooth LED Rapid Flashing Blue: Power On, Bluetooth On Slow Flashing Blue: Bluetooth link established Power Status LED Flashing Yellow-Green: Charg
ملخص المحتوى في الصفحة رقم 12
3 GPS 10X SOFTWARE INTERFACE The interface protocol design of the GPS 10x product is based on the National Marine Electronics Association’s NMEA 0183 ASCII interface specification. This standard is fully defined in NMEA 0183, Version 2.30. Copies may be obtained from NMEA, http://www.nmea.org/. In addition to the standard NMEA 0183 sentences, the GPS 10x may also be configured to transmit information over their serial interface using NMEA 0183 compliant Garmin proprietary sentences. These
ملخص المحتوى في الصفحة رقم 13
3.1.2 Output Sentence Enable/Disable (PGRMO) The $PGRMO sentence provides the ability to enable and disable specific output sentences. The following sentences are enabled at the factory: GPGGA, GPGSA, GPGSV, GPRMC, and PGRMT. $PGRMO,<1>,<2>*hh <1> Target sentence description (e.g., PGRMT, GPGSV, etc.) <2> Target sentence mode, where: 0 = disable specified sentence 1 = enable specified sentence 2 = disable all output sentences 3 = enable all output sentences (except GPALM)
ملخص المحتوى في الصفحة رقم 14
3.2.2 Transmitted Time The GPS sensor outputs UTC (Coordinated Universal Time) date and time of day in the transmitted sentences. Before the initial position fix, the on-board clock provides the date and time of day. After the initial position fix, the date and time of day are calculated using GPS satellite information and are synchronized with the one-pulse-per-second output. The GPS sensor uses information obtained from the GPS satellites to add or delete UTC leap seconds and correct the
ملخص المحتوى في الصفحة رقم 15
3.2.4 Recommended Minimum Specific GPS/TRANSIT Data (RMC) $GPRMC,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,<10>,<11>,<12>*hh <1> UTC time of position fix, hhmmss format <2> Status, A = Valid position, V = NAV receiver warning <3> Latitude, ddmm.mmmm format (leading zeros will be transmitted) <4> Latitude hemisphere, N or S <5> Longitude, dddmm.mmmm format (leading zeros will be transmitted) <6> Longitude hemisphere, E or W <7> Speed over ground, 000.0 to 999.9 knots (leading zeros wi
ملخص المحتوى في الصفحة رقم 16
3.2.8 GPS Satellites in View (GSV) $GPGSV,<1>,<2>,<3>,<4>,<5>,<6>,<7>,...<4>,<5>,<6>,<7>*hh <1> Total number of GSV sentences to be transmitted <2> Number of current GSV sentence <3> Total number of satellites in view, 00 to 12 (leading zeros will be transmitted) <4> Satellite PRN number, 01 to 32 (leading zeros will be transmitted) <5> Satellite elevation, 00 to 90 degrees (leading zeros will be transmitted) <6> Satellite azimuth, 000 to 359 degrees, true (leading zeros will be
ملخص المحتوى في الصفحة رقم 17
APPENDIX A: BINARY PHASE OUTPUT FORMAT In binary phase output mode, GPS 10x series products will transmit two types of packets once per second. One record contains primarily post-process information such as position and velocity information. The second record contains receiver measurement information. Refer to the Garmin Device Interface Specification for details on how to form and parse Garmin packets. At the time of this printing, these specs are available from the technical suppport
ملخص المحتوى في الصفحة رقم 18
Satellite Data Record The satellite data has a record ID of 0x72 with 84 (0x54) data bytes. The data bytes contain the data for the 12 channels as described below. For each satellite, the following data is available: typedef struct { uint8 svid; //space vehicle identification (1-32 and 33-64 for WAAS) uint16 snr; //signal-to-noise ratio uint8 elev; //satellite elevation in degrees uint16 azmth; //satellite azimuth in degrees uint8 status; //status bit-field } cpo_sat_data;
ملخص المحتوى في الصفحة رقم 19
Position Record The Position Record has a record identifier of typedef struct { float alt; float epe; float eph; Sample C code to receive the two records should filter DLE and ETX bytes as described below: typedef enum { DAT, DLE, ETX } rx_state_type; /* Declare and initialize static variables */ static char in_que[ 256 ]; static int in_que_ptr = 0; static rx_state_type rx_state = DAT; . . . float epv; int fix; double gps_tow; double la
ملخص المحتوى في الصفحة رقم 20
DLE and ETX bytes: void add_to_que( char data ) { #define DLE_BYTE 0x10 #define ETX_BYTE 0x03 if ( rx_state == DAT ) { if ( data == DLE_BYTE ) { rx_state = DLE; } else { in_que[ in_que_ptr++ ] = data; } } else if ( rx_state == DLE ) { if ( data == ETX_BYTE ) { rx_state = ETX; } else { rx_state = DAT; in_que[ in_que_ptr++ ] = data; }
