ملخص المحتوى في الصفحة رقم 1
Installation Manual
GPS RECEIVER GP-310B
SAFETY INSTRUCTIONS ...........................................................................i
SYSTEM CONFIGURATION ......................................................................1
EQUIPMENT LISTS ...................................................................................2
1. MOUNTING ............................................................................................3
2. WIRING ....................................................
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
SAFETY INSTRUCTIONS CAUTION CAUTION Confirm that the power supply voltage Do not use the equipment for other than is compatible with the voltage rating its intended purpose. of the equipment. Improper use of the equipment can result Connection to the wrong power supply can in personal injury or equipment damage. cause fire or equipment damage. No one navigation device should ever be solely relied upon for the navigation of a vessel. Always confirm position against all available aids to na
ملخص المحتوى في الصفحة رقم 4
This page is intentionally left blank.
ملخص المحتوى في الصفحة رقم 5
SYSTEM CONFIGURATION This antenna incorporates a GPS receiver. It can be connected directly to NAVnet equipment and Multi Display RD-30. However, if it connected to an equipment other than the NAVnet product, a junction box (local supply) is required. NAVnet Series Model 1722/1722C Model 1833C Model 1732/1732C Model 1933C Model 1742/1742C Model 1943C Model 1762/1762C GD-1900C GD-1700C GD-1700 Model 1833 Model 1933 Model 1943 Multi Display RD-30 non-NAVnet GD-XXXX GR-80 Ship's Main (12-24 VDC) JU
ملخص المحتوى في الصفحة رقم 6
EQUIPMENT LISTS Standard supply No. Name Type Code No. Qty Remarks 1 GPS Receiver GP-310B 1 With 10m cable Optional equipment No. Name Type Code No. Qty Remarks 1 Cable Assembly MJ-A7SPF/SRMD-100 000-144-534 1 10m 2 Mast mounting kit CP20-0111 004-365-780 1 2
ملخص المحتوى في الصفحة رقم 7
1. MOUNTING Mounting considerations When selecting a mounting location for the antenna unit keeps in mind the following points. • The antenna may be mounted three ways: screwed into a pipe (local supply), fixed to a post with the optional mast mounting kit, or screwed into an optional mounting base. For fixing by the post or pipe, it is recommended to use stays to prevent damage to the GPS receiver. • Select a location out of the radar beam. The radar beam will obstruct or prevent rece
ملخص المحتوى في الصفحة رقم 8
2. WIRING This unit outputs position and speed to external equipment, mainly to NAVnet equipment. To connect to NAVnet equipment, connect waterproof connector directly to NAVnet equipment. For connection to other equipment, use a junction box (local supply), which provides seven terminals. A ten meter cable is attached to this unit. If the distance between this unit and monitor more than 10 m, use optional extension cable (10 m). Up to four extension cables can be connected serially. Connecting
ملخص المحتوى في الصفحة رقم 9
Connecting to FURUNO Multi Display RD-30 w/cable 10 m MULTI DISPLAY RD-30 AUX port AUX 12-24 VDC IN/OUT 12-24 VDC IN/OUT port Rear Panel Connecting to other type of equipment Cut the connector and fabricate the cable end, using a crimp-on lug similar terminal. Prepare a junction box locally. JUNCTION BOX w/cable non-NAVnet 10 m YELLOW 1 RD-A RS-422* input for radar/plotter 3 GREEN RD-B 4 NMEA0183 Ver.2.00 2 WHITE 3 1 TD-A RS-422 output from GR-80 BLUE 2 TD-B 4 RED 5 Fuse 0.5A BLACK 6 Dra
ملخص المحتوى في الصفحة رقم 10
Output/Input data format Priority Input data Output data Setting Default of Output Cycle High GPDTM Geometric datum Yes Yes ↑ XXGGA Position GPGGA GPS fix data Yes Yes XXZDA UTC date GPZDA UTC time and date Yes Yes XXGLL Position GPGLL Geographic Yes position GPGSA Fixing state, DOP Yes GPGSV Satellite Yes Yes information GPVTG Course over Yes Yes ground and ground speed XXRMC Position, UTC GPRMC Recommended Yes date minimum specific ↓ GPS/TRANSIT Low data Note1) Data output in order from high t
ملخص المحتوى في الصفحة رقم 11
3. DEFAULT SETTINGS Setting Default setting GPS data Initial Latitude/Longitude North=34’44.0000, East=135’21.0000 UTC Time 1997/1/1 0:0:12 Antenna Height 0 m Almanac Data Almanac Date 1980/1/6 0:0:0 Ephemeris Data Receiver Local Zone Time +0 parameter PDOP 6 Geometric Datum 1(WGS84) MASK Elevation 5° Disable satellite 00000000(none) Smoothing 2 (Standard) Dynamic 2 (Standard) Data Output Cycle DTM, GGA, ZDA, GSV, VTG (1s) DGPS Setting Parameter 1 (LSB first) Note) For connecting to equipmen
ملخص المحتوى في الصفحة رقم 12
SPECIFICATIONS OF THE BLACKBOX GPS SENSOR GP-310B 1 GENERAL 1.1 Receiving Channels 12 channels parallel, 12 satellite tracking 1.2 Rx Frequency 1575.42 MHz 1.3 Rx Code C/A code 1.4 Position Fixing System All in view, 8-state Kalman filter 1.5 Position Accuracy GPS: 10 m approx., 95% of the time (HDOP 4) DGPS: 5 m approx., 95% of the time 1.6 Tracking Velocity 999 kt 1.7 Position-fixing Time Warm start: 12 s, Cold start: 90 s 1.8 Position Update Interval 1 s 2 I/O INTERFACE
ملخص المحتوى في الصفحة رقم 13
1/ 1 20AU-X-985 1 - 1 ＰＡ ＰＡ ＰＡ ＰＡ ＣＫ ＣＫ ＣＫ ＣＫ ＩＮ ＩＮ ＩＮ ＩＮ Ｇ Ｇ Ｇ Ｇ ＬＩ ＬＩ ＬＩ ＬＩ ＳＴ ＳＴ ＳＴ ＳＴ GP-3 GP-3 GP-3 GP-31 1 1 10B 0B 0B 0B (E) (E) (E) (E) N A M E DESCRIPTION/CODE № O U T L I N E Q'TY ユニ ユニ ット ット UNIT UNIT ユニ ユニ ット ット UNIT UNIT GPS受信機 GP-3 10B-E 1 GPS RECEIVER 000- 144-5 12 （略 （略 （略 （略図 図 図 図の寸法 の寸法 の寸法 の寸法は、 は、 は、 は、参考 参考 参考 参考値で 値で 値で 値です。 す。 す。 す。 DIMENSIONS IN DRAWING FO DIMENSIONS IN DRAWING FO DIMENSIONS IN DRAWING FO DIMENSIONS IN DRAWING FOR REFERENCE ONLY. R REFEREN
ملخص المحتوى في الصفحة رقم 14
ملخص المحتوى في الصفحة رقم 15
ملخص المحتوى في الصفحة رقم 16
Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi Nishinomiy ya, Ja a, Jap pan an Tele Telep phone : hone : 0798-65-2111 0798-65-2111 Telefax : Telefax : 0798-65-4200 0798-65-4200 FIRST EDITION : FIRST EDITION : MAR. MAR. 2001 2001 A All ri ll rig ghts reserved. hts reserved. Printed in Japan Printed in Japan C : C : APR. APR. 22,2002 22,2002 PUB.No. PUB.No. IME-44120-C IME-44120-C *00080917900* *00080917900* *00080917900* *00080917
