ملخص المحتوى في الصفحة رقم 1
SERIAL #:
Barbecue 2000
SAFE USE, CARE AND ASSEMBLY MANUAL
FOR YOUR SAFETY
If You Smell Gas
1. Immediately turn off the flow
of gas to the unit.
2. Extinguish any open flame.
3. Open the lid of the unit.
4. If the odour does not stop quickly,
immediately call your gas supplier
or Fire Department for assistance.
FOR YOUR SAFETY
1. Do not store or use gasoline or other
flammable vapours and liquids in the
vicinity of this or other appliance.
2. An LP Gas cylinder not connected for
use shall not
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENT S WARRANT Y Warranty . . . . . . . . . . . . . . . . . ii 3 Year Limited Warranty This Centro Barbecue carries a three year limited warranty against defects in Installation Information . . . . . . 1 manufacturing workmanship. This Limited Warranty is nontransferable and Additional Warnings . . . . . . . . 1 becomes void if used for commercial or rental purposes. This warranty applies only when grill is used in Canada. The bill of sale or a copy will be required togeth- Use of L
ملخص المحتوى في الصفحة رقم 3
INSTALLATION The installation of this appliance must be in accordance with all local codes, or in the absence of local codes: INFORMATION • Canadian installation must conform to the current national standards, which at this time are CAN/CGA-B149.1/2-Natural Gas/Propane installation code. ADDITIONAL Minimum clearance to adjacent combustible materials: • 76 cm (30˝) from furthest protruding edge on side of barbecue. WARNINGS • 76 cm (30˝) from furthest protruding edge on back of barbecue. See Draw
ملخص المحتوى في الصفحة رقم 4
The Cylinder must also be equipped with: • A shut-off valve with a correct cylinder valve outlet as specified in current standards. • Canada: CAN/CGA 1.6g-M97 Outdoor Gas Grilles. a) A safety relief valve with direct connection to the vapour space of the cylinder. b) A collar to protect the tank shut-off valve. c) A device for vapour withdrawal. d) A ring on the bottom to secure the tank to its support assembly. • Always turn off the cylinder valve completely when the barbecue is not in use. • A
ملخص المحتوى في الصفحة رقم 5
PRIOR TO USING Do not use your barbecue until you have carefully read and fully understand all the information in this manual. Please ensure the following: • Your barbecue is properly assembled. • There are no leaks in the system (see “Leak Test”). • The burner is properly assembled, with the Venturi tubes seated over the valve outlets (Drawing E) and that there is nothing blocking the Venturi tubes (Drawing F). • Ensure that all power cords and/or gas supply hoses will not touch or be near sur
ملخص المحتوى في الصفحة رقم 6
SAFETY HOSE Propane Gas Models: Your barbecue is designed to operate on L.P. (Propane) gas at a pressure of 2.74 Kpa (11˝ water column). A regulator preset to this pressure is supplied AND REGULATOR with the barbecue and must be used. This regulator is equipped with the Type-1 quick-closing connecting system, which incor- porates these safety features: • Will not allow gas to flow until a positive seal has been made. • Has a thermal component that will automatically shut off the flow of gas bet
ملخص المحتوى في الصفحة رقم 7
To Reset The Gas Regulator Safety Device 1. Close the LP (propane) tank valve. 2. Turn all burner control knobs to the OFF position. 3. Disconnect the regulator from the LP tank. 4. Open the grill lid. 5. Open all of the control knobs to the high position. 6. Wait 2 minutes. 7. Close all of the control knobs. 8. Re-connect the regulator to the LP tank. Test for leaks. 9. With lid open, turn the left burner control knob to the”HIGH”position and then ignite the grill by turning Rotary ignitor clo
ملخص المحتوى في الصفحة رقم 8
LIGHTING Make Sure you have followed all the safety checks, procedures and instructions indicated in the previous section, before attempting to light the grill. THE GRILL Lighting The Main Burners 1. Always open the hood completely and always inspect the grill and burners to confirm that all components are properly positioned before lighting the main burners. WARNING Never stand with your head directly over the Barbecue when preparing to light the main burners, to prevent possible bodily injury.
ملخص المحتوى في الصفحة رقم 9
6. Confirm that the burner is properly lit. If the flame pattern is other than normal, consult the Troubleshooting Guide for corrective action. 7. Always preheat the Barbecue before starting to cook. Light all burners and adjust them to the HIGH position for 5-10 minutes. Before placing any food on the Barbecue, clean the cooking grids with a Porcelain cleaning brush. 8. Adjust the controls to a medium setting for most cooking requirements. A light coating of cooking oil on the cooking grids,
ملخص المحتوى في الصفحة رقم 10
Item No. Quantity Specification Part No. PA RTS LISTING FOR A 1 Top Lid Assembly 85-1103 (PROPANE) AA 1 Top Lid Weldment G413-0100-01 G41301 AB 1 Handle F/ Top Lid G413-0001-01 AC 1 Thermometer G413-0029-01 AD 2 Screw for Top Lid G607-0002-01 B 1 Burner Box Assembly BA 1 Burner Box Weldment G413-0200-01 BB 1 Left Side Upper Panel G413-0300-01 BC 1 Right Side Upper Panel G413-0400-01 BD 3 Main Burner G413-5000-01 BE 2 Carryover Tube G413-0004-01 BF 3 Flame Tamer G413-0003-01 BG 2 Cooking Grate G4
ملخص المحتوى في الصفحة رقم 11
85-1103 (PROPANE) G41301 BI BH AC AA BG CL AD AD BF AB BE BD CI CD BC DB CJ CK BA DA BB DC CA BA CB CD CG EB EA CE CC CH CF ED EC EE EF EG EH 9
ملخص المحتوى في الصفحة رقم 12
Item No. Quantity Specification Part No. PA RTS LISTING FOR A 1 Top Lid Assembly 85-1003-6 (NATURAL GAS) AA 1 Top Lid Weldment G413-0100-01 G41302 AB 1 Handle F/ Top Lid G413-0001-01 AC 1 Thermometer G413-0029-01 AD 2 Screw for Top Lid G607-0002-01 B 1 Burner Box Assembly BA 1 Burner Box Weldment G413-0200-01 BB 1 Left Side Upper Panel G413-0300-01 BC 1 Right Side Upper Panel G413-0400-01 BD 3 Main Burner Assembly G413-5000-01 BE 2 Carryover Tube G413-0004-01 BF 3 Flame Tamer G413-0003-01 BG 2 C
ملخص المحتوى في الصفحة رقم 13
85-1003-6 (NATURAL GAS) G41302 BI BI BH AC AC AA AA BG BG CL CL AD AD AD AD BF BF AB AB BE BE BD BD CI CI CD CD BC BC DB DB CK CJ CJ CK BA BA DA DA BB BB DC DC CA CA BA BA CD CD CG CG EB EB EA EA CB CE CE CC CC CH CH CF CF ED ED EC EC EE EE EF EF EG EG EH EH 11
ملخص المحتوى في الصفحة رقم 14
ASSEMBLY INSTRUCTIONS Hardware Pack List No. Description Part Number Quantity Tools Needed for Assembly 1 1/4” x 38 mm Screw 20120-13038-250 4 2 1/4” x 13 mm Screw 20120-13013-250 12 ® • • #2 Phillips screwdriver Pliers 3 Ø7 Lock Washer 41400-07000-250 16 • • 1/4˝ slotted screwdriver Rubber mallet 4 Ø7 Flat Washer 40300-07000-250 16 • 5 1/4”-20UNC Nut 30220-13000-250 6 Adjustable wrench 6 No. 10 x 10 Screw 20124-10010-250 12 Before assembling the barbecue, read these instructions carefully. 7 Ø5
ملخص المحتوى في الصفحة رقم 15
Fig. 1 1 Attach two front casters (EH) and two back casters with lock (EG) to the bottom shelf (EF) by using the provided wrench hardware #11. EF EG EH Fig. 2 2 EB Assemble the cart left side panel (EA) and cart right side panel EA (EB) to the bottom shelf (EF) using hardware #2, #3, #4 and #5 (x6). 2 EF 3 4 5 Fig. 3 A 3 B Assemble the whole top lid assembly (A) and burner box assembly (B) DB DA to the cart assembly (done in Step 2). Attach both upper side panels (DA) & (DB) to both lower sidep
ملخص المحتوى في الصفحة رقم 16
Fig. 4 4 Assemble the upper brace (CH) below the control panel (CE) as BB CE shown using hardware #6,#7 and #8 (x4). CH Remove the screws and nuts from the top lid handle (AB), then assemble the top lid handle (AB) to the top lid (AC) by using the hardware which was just removed. EA Fig. 5 BG 5 Open lid (A) and position the three flame tamers (BF) above the BF burners (BD) as shown. Place the two cooking grates (BG) above the flame tamers. BD Fig. 6 6 BI Attach the warming rack (BI) to the insi
ملخص المحتوى في الصفحة رقم 17
Fig. 7 CJ + CK 7 Insert grease tray left and right rail (CJ) & (CK) into the holes at the inside of the cart assembly as shown. Insert the tank heat shield (CI) 1 3 4 into the holes in the upper rail. Assemble the upper back panel (CL) to the back of the burner box by using hardware #1, #3 and #4 (x4). 6 7 8 Then attach the upper back panel (CL) to the edge of left and right CI grease tray rail as shown using hardware #6, #7 and #8 (x2). Then fix the upper back panel (CL) together with the heat
ملخص المحتوى في الصفحة رقم 18
10 Unscrew the igniter cap and place AA battery which is provided into igniter (CD) with positive end (+) facing outward. Screw igniter cap onto igniter as shown. 10 CD Fig. 10 Fig. 11 11 For propane model only Secure 20lb propane tank onto the bottom shelf of the cart as shown, attach the regulator valve to 20lb propane tank. WARNING Do not store the extra tank into the cart. 16
ملخص المحتوى في الصفحة رقم 19
INFORMATION ON This model has a 12’ hose with a male coupling plug that will allow you to attach your barbecue to your residential gas line. NATURAL GAS MODEL WE STRONGLY RECOMMEND CONTACTING A CERTIFIED GAS-TECHNICIAN TO INSTALL YOUR NATURAL GAS UNIT. Connecting to Gas Line 1. Pull back the outer sleeve located on the residential gas line (see illustration). 2. Insert the barbecue’s male coupling plug into the residential gas line’s coupling. 3. Push the male coupling plug in as far as possib
ملخص المحتوى في الصفحة رقم 20
DISTRIBUTOR Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
