SkyLink G6VR دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Universal Garage Door
Model G6VR
Remote Control
1. INTRODUCTION 2. INSTALLATION (CONT)
®
Congratulations on your purchase of the Skylink G6VR Universal If you have the multi-function wall console, do not replace the wall
TM TM
Garage Door Remote Control. This is a kit with a universal remote console by the Smart Button . You need to install the Smart Button in
TM
control and Smart Button . Simply replace the traditional wall button by parallel with your existing wall console.
TM
the Smart Button

ملخص المحتوى في الصفحة رقم 2

3. OPERATION (CONT) Erase remote controls To erase unwanted remote control(s), first erase all remote controls, then learn the ones you would like to keep. To erase remote control(s) 1. Press and hold the learn button for approx 10 seconds. 2. The LED will flash rapidly after 10 seconds to indicate all the pro- grammed remote controls have been erased. You may now release the learn button. TM 3. You have erased all the remote controls in the Smart Button . 4. BATTERY 12 volt alkaline battery (