Havis-Shields Vehicle Specific Console C-VS-1100-F150 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-VS-1100-F150
VEHICLE SPECIFIC CONSOLE
2004-2007 FORD F-150 PICK UP

TOOLS REQUIRED:
Metric Socket Set 1/8” Drill Bit
Ratcheting Wrench Phillips Screwdriver
Panel Pulling Tool Power Drill


HARDWARE:
QTY DESCRIPTION PART #
6 #8 x ¾” Phillip Sheet Metal Screws GSM33189
1 C-HK-1 (32 Torx Screws) CM86508

SUB ASSEMBLY:
1. Remove necessary components to access mounting area.
• Armrest Pad (3 Metric Hex Head screws)
• Forward Console Face Plate (Panel Pull

ملخص المحتوى في الصفحة رقم 2

2. REPLACE COMPONENTS REMOVED IN SUB ASSEMBLY: • Replace Rear Console Face Plate. • Replace Forward Console Face Plate. • Replace Armrest Pad. 3. INSTALL CONTROLS: • Wire all controls prior to installation. Note: A hole must be drilled in the bottom of the OEM console for routing of wires. • Attach control heads to console plate using equipment brackets or filler panels with #8 x 3/8” Black Torx Screws. Note: You may have to drill the console plate in the occasional situa