Havis-Shields Heavy Duty Trak Mount C-TM-GMC دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TM-GMC
HEAVY DUTY TRAK MOUNT
2000-2008 CHEVROLET/GMC SUBURBAN/TAHOE,
YUKON XL/YUKON, SILVERADO/SIERRA
TOOLS REQUIRED:
• Ratchet Wrench
• Sockets - 7/16”, 11 mm, 15 mm
• Open End Wrench- 7/16”
HARDWARE:
QTY: DESCRIPTION: PART #:
1 Front transmission hump bracket C-B24
1 Rear transmission hump bracket C-B39
1 32” Extruded Trak mount C-TM-32E
2 Extrusion end caps CM93064
16 1/4” x 3/4” hex head bolt GSM33001B
8 1/4” Serrated nut GSM30023B
8 1/4” Flat Washers

ملخص المحتوى في الصفحة رقم 2

Installation: Remove OEM trim panel covering front inner Remove OEM trim panel covering rear inner seat bolts on driver and passenger sides. seat bolts on driver and passenger sides. Remove seat bolt nuts. Remove seat bolt studs. 15 mm socket required. 11 mm socket required. Loosely pre assemble front hump bracket Loosely pre assemble rear hump bracket with 1/4” x 3/4” bolts and fl at washers, then with 1/4” x 3/4” bolts and fl at washers, then position it under the OEM front seat brackets. p