Grizzly H8098 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model H8098
1
3 ⁄2 Ton SUV
Garage Jack
Operation
Pump Handle (Figure 1): To raise the jack, rotate
Failure to follow these instructions could the pump handle clockwise completely, then move
result in serious personal injury or death: the pump handle up and down. To lower the jack,
slowly rotate the pump handle counterclockwise.
1. DO NOT overload this jack beyond its
rated capacity. Overloading can cause
the jack to collapse and drop the load.
2. ALWAYS support the vehicle with appro-
pria

ملخص المحتوى في الصفحة رقم 2

Maintenance Bleeding the Air Keep the hydraulic rams clean and free of any If the jack becomes spongy or will not rise when dust, dirt, or foreign debris. Abrasive material pumped, then air bubbles may be in the hydraulic stuck to the ram can damage the hydraulic seal system. when the ram is retracted back into the jack. Regularly wipe the hydraulic rams clean with a To remove the air bubbles: lightly oiled rag. 1. Remove the fill plug. The Model H8098 will require hydraulic fluid after long

ملخص المحتوى في الصفحة رقم 3

H8098 Parts Breakdown and List �� � �� � �� �� �� �� � �� �� �� �� � � �� �� �� �� �� �� � � �� ���� �� �� � �� �� � �� ����� �� �� �� � �� �� �� �� �� �� �� ������ �� �� ������ REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8098001 LIFTING ARM ASSEMBLY 24 PB49M HEX BOLT M12-1.75 X 20 2 PH8098002 RUBBER PAD 25 PH8098025 TORSION SPRING 3 PH8098003 SADDLE 26 PR11M EXT RETAINING RING 25MM 4 PR06M EXT RETAINING RING 16MM 27 PH8098027 LINKAGE BOLT 5 PH8098005 LONG CONNECTING ROD 28 PH8098028 CONNE

ملخص المحتوى في الصفحة رقم 4

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ������ ���� �������� ������ ���� ��������� � ���� ������� � ��� ���� ��������� ������� � � ������� �������� � � ������� �������� ������� ��� ����� � � ����������������������� �������� � � � � ����� ������ � ���� � ���� ����� ������ �������