ملخص المحتوى في الصفحة رقم 1
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
22” Digital LCD TV
Owner’s Manual
LC225SC9
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
© 2008 Funai Electric Co., Ltd.
NEED HELP?
PLEASE CALL TOLL FREE!
1-800-968-3429
OR VISIT OUR WEB SITE AT
www.sylvania-ce.com
ملخص المحتوى في الصفحة رقم 2
NTRODUCTION I The model and serial numbers of this unit may be found on the cabinet. Model No.: You should record and retain those numbers for future reference. Serial No.: Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION
ملخص المحتوى في الصفحة رقم 3
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
ملخص المحتوى في الصفحة رقم 4
f f r r o o n n t t s s i i d d e e NTRODUCTION I Supplied Accessories owner’s manual remote control batteries (1EMN23739) (NF606UD) (AA x 2) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items. Attachi
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Features Contents • DTV/TV/CATV INTRODUCTION - You can use your remote control to select Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 channels which are broadcast in digital format and Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 conventional analog f
ملخص المحتوى في الصفحة رقم 6
NTRODUCTION I Buttons on the Remote Control 1. POWER (p. 13) 12. INFO (p. 17) Digital Mode (DTV) Press to turn the unit on and off. • Press to display the channel 2. MUTE (p. 15) 1 11 information, signal type and TV Press to turn the sound on and off. 2 setting. 12 3. SLEEP (p. 15) 3 Analog Mode (TV) 13 Press to activate the sleep timer. • Press to display the channel 4. Number buttons (p. 15) number, signal type and TV 14 • Press to select channels. 4 setting. - (hyphen) External Inp
ملخص المحتوى في الصفحة رقم 7
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Control Panel 1. POWER y (p. 13) side of this unit Press to turn the unit on and off. 2. INPUT SELECT/ENTER (p. 16) • Press to switch the input modes. 1 • Press to confirm your selection. 2 K L 3. CHANNEL / (p. 15) Press to select channels or move up/down through the CHANNEL 3 main menu items. X Y 4. VOLUME / (p. 15) X Y Press to adjust the volume or move right ( )/left ( ) VOLUME 4 through th
ملخص المحتوى في الصفحة رقم 8
REPARATION P Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sur e your antenna or other device is connected properly before plugging in the power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.) VHF / UHF rear of this unit antenna RF coaxial cable or cable TV company * Once c
ملخص المحتوى في الصفحة رقم 9
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution. Use an HDMI cable to connect the unit to ex
ملخص المحتوى في الصفحة رقم 10
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s component video input jacks, connect an RCA audio cable to the audio L/R jacks of VIDEO2. e.g.) RCA audio cable RCA componen
ملخص المحتوى في الصفحة رقم 11
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO 1.
ملخص المحتوى في الصفحة رقم 12
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor. e.g.) VGA cable should be rear of this unit with ferrite core. VGA cable mini-plug audio cable VIDEO 2 COMPONENT AUDIO Y Pb Pr L R VIDEO 1 AUDIO personal computer S-VIDEO VIDEO LR PC-IN HDMI-IN AUDIO AUDIO COAXIAL LR The following signals can be displayed: Format R
ملخص المحتوى في الصفحة رقم 13
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Note: Initial Setup • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and auto channel scan, • If you press [POWER] or [SETUP]
ملخص المحتوى في الصفحة رقم 14
NITIAL SETTING I LANGUAGE Note: You can change the language (English, Spanish, • After setting “Auto Channel Scan”, using [CH. K / L] on the French) displayed on the main menu. remote control skips unavailable programs automatically. (Refer to “Language Selection” on page 14.) • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel Auto Channel Scan scan, the setting will be canceled. • Channel settings will be saved even
ملخص المحتوى في الصفحة رقم 15
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION ATCHING TV W Channel Selection Volume Adjustment K Select channels by using [CH. / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. K X Y Use [CH. / L] or [the Number buttons] to select the Use [VOL. / ] to adjust the audio volume. memorized channels. Volume 20 or or or • The volume bar
ملخص المحتوى في الصفحة رقم 16
ATCHING TV W Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [STILL] to pause the image shown on the TV Press [AUDIO ] to display the currently selected screen. 1 audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio Still channel. 6 • The sound output will not be paused. SAP
ملخص المحتوى في الصفحة رقم 17
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO ] to display the details of the cu
ملخص المحتوى في الصفحة رقم 18
ATCHING TV W TV Screen Display Mode 3-5 types of display modes can be selected when the unit receives 4:3 / 16:9 video signal or PC input signal. Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio. For 4:3 video signal For 16:9 video signal Wide Full Expand (digital mode) Sidebar Wide Side Cut Cinema (analog / external input mode) Zoom Full Cinema Full Sidebar Select to display a 16:9 picture to fill the screen. Select to display a 4:3 picture at its original size. The black
ملخص المحتوى في الصفحة رقم 19
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION For PC input signal Full Select to display a picture to fill the screen. Dot By Dot Select to display a picture in its original size. Note: A B * * Normal Normal • You may not switch the display mode depending on the program or resolution. • You can change the screen resolution on your PC. Full Dot By Dot A * Normal Select to display a vertically stretched picture without distorting the aspect
ملخص المحتوى في الصفحة رقم 20
PTIONAL SETTING O Channel List Manual Register The channel list function lets you remove undesired channels from the The manual register function lets you add the channels that were not added channel registration list. by the auto channel scan due to the reception condition at the initial setting. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cursor K/ L] to select “CHANNEL”, then press Use [Cursor K/ L] to select “CHANNEL”, then press 2 2 [
