Edelbrock PERFORMER RPM 60549* دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PERFORMER RPM 454-R ALUMINUM CYLINDER HEADS
for Big-block Chevrolet V8s
CATALOG #60549* (Bare) and #60559* (Complete)
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new cylinder heads. If you have any questions or problems, do not hesitate to contact
our Technical Hotline at: (800) 416-8628 from 7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at:
edelbrock@edelbrock.com.
DESCRIPTION: The Edelbrock Performer RPM Street Cyli

ملخص المحتوى في الصفحة رقم 2

INSTALLATION: Installation is the same as for original equipment Be sure that the surface of the block and the surface of the head is cylinder heads. Consult service manual for specific procedures, if thoroughly cleaned to remove any oily film before installation. Use necessary. For 454 and smaller Mark IV engines, use Edelbrock head alcohol or lacquer thinner on a lint-free rag to clean. Apply liquid teflon gasket #7302, Fel-Pro head gasket #1017-1 or equivalent. For 454 or suitable thread seal