Edelbrock Performer RPM 340-360 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PERFORMER RPM
Camshaft/Lifters/Lube Kit
CATALOG #7177
MODEL: 340-360 c.i.d. Chrysler V8, 1967 & 1985
• PLEASE study these instructions carefully before installing your new camshaft. If you have any questions or problems, do not hesi-
tate to call our Technical Hotline at: 1-800-416-8628.
 CAMSHAFT: Edelbrock Performer RPM camshafts are ground specifically for use with the corresponding Performer RPM manifold.
The Performer RPM manifold #7176, and Performer RPM camshaft #7177, are designed to wo

ملخص المحتوى في الصفحة رقم 2

INSTRUCTIONS FOR ENGINE PARTS REMOVAL  INSTALLATION INSTRUCTIONS  BEFORE CAMSHAFT INSTALLATION 1. Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring 1. Disconnect battery. during initial start-up. 2. For ease of installation, keep all parts in some sort of order. 2. Install new camshaft with new sprockets, timing chain and WARNING: Do not remove radiator cap or radiator hose if lifters. engine is hot. CAUTION: Use Edelbrock P

ملخص المحتوى في الصفحة رقم 3

terminal in the cap, and with the vacuum advance canister in its With the Edelbrock manifold and camshaft package plus a original position. header installation, a carburetor jet change may be required for 3. Lightly tighten the hold-down clamp so that the distributor can best performance. Due to the varied applications of year and still be turned to determine final setting using a timing light model of vehicles, no one combination could suffice for all with the engine running. installations. Th

ملخص المحتوى في الصفحة رقم 4

 CAUTION: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7803. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not rec- ommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specific timing selection. Figure 1- Chrysler 340-360 c.i.d. V8 Firing Order 1-8-4-3-6-5-7-2 Turn distributor counter-clockwise to advance timing. TIMING MARKS Figure

ملخص المحتوى في الصفحة رقم 5

CAMSHAFT: Performer RPM Hydraulic CAMSHAFT: Performer RPM Hydraulic CATALOG #7177 CATALOG #7177 ENGINE: Chrysler 340-360 c.i.d. V8 ENGINE: Chrysler 340-360 c.i.d. V8 RPM RANGE: 1500-6500 RPM RANGE: 1500-6500 CAUTION: Do not use dual valve springs. CAUTION: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat Valve Use only recommended Edelbrock Sure Seat Valve Springs #5777. Springs #5777. Use stock ratio rocker arms only. Use stock ratio rocker arms only. Duration at .006" Li