Edelbrock Performer IAS دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

EDELBROCK SHOCK
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Edelbrock shocks. If you have any questions, please call our
Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
Shock Post Mount
IMPORTANT NOTES:
• Any time you are working under a vehicle, be sure to use the proper jackstands and Jam Nut
tire chocks to prevent any shifting or slipping of the car. Nev

ملخص المحتوى في الصفحة رقم 2

IMPORTANT INSTALLATION NOTES � If you are uncertain of proper shock installation procedure, please consult appropriate service manual. Torque all fasteners to vehicle manufacturer’s specs. Note: On Post Mount shocks, finger tighten nut to achieve zero clearance between the retaining washers and the bushings, then continue to tighten approximately 5-6 turns to achieve proper pre-load. Bushings should be slightly bulged. Secure with Jam Nut. On some vehicles, nut may bottom out on stud before 5-6

ملخص المحتوى في الصفحة رقم 3

Warranty Inspection and Procedure Possible Cause Action Condition Inspection Procedure A slight amount of oil Visual inspection for slight Normal occurrence when ✓ Not defective. Shock will perform as intended. on the piston rod and/or amount of oil film. the shock is dyno-tested. ✓ No replacement necessary. shock body. ✓ Place a warranty tag on shock Oil dripping off shock. Visual inspection for oil Damaged seal. and return. dripping off the bottom ✓ Will be replaced. mount of the shock. ✓ Plac

ملخص المحتوى في الصفحة رقم 4

Edelbrock Corporation, 2700 California Street, Torrance, CA 90503 Tech Line: 1-800-416-8628 E-mail: Edelbrock@Edelbrock.com ©2007 Edelbrock Corporation Page 4 of 4 Rev. 1/07 Brochure No. 84-5496 mc