Edelbrock Chevrolet Imapala 5.7L LT1 V8 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TUBULAR EXHAUST SYSTEM
For 1994-1996 Chevrolet Imapala SS
5.7L LT1 V8, Auto Transmission
Catalog #66032, #66033
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com.
TUBULAR EXHAUST SYSTEM: These components are designed as a system to improve the ex

ملخص المحتوى في الصفحة رقم 2

INSTALLATION INSTRUCTIONS • DISASSEMBLY 10. Remove manifold from underneath car. 1. Disconnect negative battery cable. 11. Install T.E.S. flange gasket and one 3/8"-16 x 1" 2. Raise vehicle and unplug both O2 sensor cables. bolt, lock washer, and flat washer at rearmost bolt 3. Starting with the driver's side, remove the three hole (leave bolt loose enough to accept T.E.S.). bolts on the inlet flange on the catalytic converter. 12. Place manifold into position from above and start 4. Just behind

ملخص المحتوى في الصفحة رقم 3

� FINAL INSPECTION 3. At this point it is a good idea to look everything over 1. Check all lines (hydraulic, vacuum, air and make sure that nothing was missed in conditioning and fuel) to ensure there is assembly. adequate clearance to T.E.S. components. 4. Start vehicle and bring up to normal operating Note especially a/c lines on right side; secure temperature. Check for possible leaks. away from T.E.S. 5. Turn engine off and let cool. Tighten all bolts again. 2. Re-connect battery. 2” Header