Edelbrock Acura Integra 6837 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Pro-Flo Header
1994-2001 Acura Integra GS, RS, LS (Non-

Catalog PNs 6637, 6737, 6837
Please study these instructions carefully before installing your new Pro-
died and understood before you remove your stock
system. Failure to follow these instructions may void your warranty. If you h
-800-416- –
Monday through Friday, Pacific Standard Time.


-Flo header components are designed to improve the exhaust
e Acura 1.8L (Non-VTec) engine. A performance gain can be expected with the
insta

ملخص المحتوى في الصفحة رقم 2

DISASSEMBLY (Continued) 5. Remove O2 sensor (if applicable) being careful not to destroy or rupture the unit. clean this unit in any cleaning solvents and do not rupture . 6. Remove the two nuts from hanger bracket. Remove the two bolts and springs at the catalytic converter. Then unbolt the three bolts at the mid-section of manifold and remove lower portion o - 7. Remove the bolt that is attached to the engine block in the lower section of manifold. Remove bolts from manifold at