Edelbrock 7983 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TUBULAR EXHAUST SYSTEM
CATALOG #6883/#7983
1986-1993 Ford Mustang /Mark/Capri with 5.0L V8
Equal Length TES Headers
INSTRUCTIONS
pound (GM #5613695)
 PLEASE study these instructions car efully before
installing your new Tubular Exhaust System (TES). If you
 WARNING: The use of "Thermal Wrap" materials will
have any questions or problems, do not hesitate to con-
void the warranty on your Tubular Exhaust System Those .
tact our Technical Hotline at : 1-800-416-8628.
products can cause excessiv

ملخص المحتوى في الصفحة رقم 2

 SMOG HOSE ASSEMBLY tional hose clamps are needed. 1. Use hardware supplied as shown in Figure 1 for smog 4. Tighten clamps on smog hoses. Reinstall air intake tube, hose adaptation air flow sensor and air cleaner cover. #1 3/4" diameter extension hose, 5-1/2" long. 5. Tighten H-pipe to T.E.S. headers. #2 3/4" diameter bent extension tube. 6.Start engine and check for any exhaust leaks. If every- #3 2-#10 hose clamps. thing is satisfactory, you are ready to go. #4 5/16" x 18 bolt. hex nut, and