Edelbrock 75284 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CHRYSLER 5.7L HEMI DUAL QUAD INTAKE MANIFOLD
For Carbureted Chrysler HEMI 5.7L Engines
®
Catalog #7528, #75284
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Edelbrock RPM Dual-Quad Intake Manifold. If you have any
questions, please contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail
us at Edelbrock@Edelbrock.com.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. I

ملخص المحتوى في الصفحة رقم 2

INSTALLATION PROCEDURE 1. Before beginning installation, inspect all passages in the manifold for any debris or contaminants. Remove any loose material to prevent potential engine damage. Use the supplied aluminum cap to plug the oil fill hole located at the front, driver’s side of the manifold. 2. Fully clean the cylinder head intake flanges. 3. Insert the port o-ring gaskets into the machined grooves around the runner exits. It may be necessary to trim a small locating tab on each o-ring to al