Edelbrock 73802 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Edelbrock Nitrous Systems
Installation Instructions
P/N 73802 - 2 5/8” Nitrous Pressure Gauge
NOTE: Please consult the Edelbrock System Installation
Instructions for the proper way to interact safely with Nitrous
-4AN fitting with wrench flat.
Oxide. Please take all safety precautions when working on any
(Use caution, do not over tighten)
nitrous oxide injection system.

WARNINGS:
• USE ONLY Teflon sealant for all tapered pipe threads.
No sealant is required on AN flare fitting

ملخص المحتوى في الصفحة رقم 2

Bill Of Materials Qty. Description 1 0-1400 psi Nitrous gauge 1 Gauge light with harness 2 Star washers 2 Attaching screws 1 Gauge bracket 1 Red light cover 1 Green light cover 1 Special restrictor fitting 1 Female AN adapter NOTES: • If gauge mounting is other than in-dash or under dash, mounting provisions may have to be determined by the installer. • Test all fittings and hoses for any leakage. If any leaks are detected, determine the cause of the leak and repair. Do not ope