Edelbrock 6853 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Pro-Flo Header
For 1994-2001 Acura Integra GSR
Catalog #6652, #6752, #6852
& For 1997-2001 Acura Integra Type R
Catalog #6653, #6753, & #6853
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Pro-Flo Header. They provide general guidelines to
be studied and understood before you remove your stock system. Failure to follow these instructions may void your
warranty. If you have any questions or problems, please contact our Technical Hotline at : 1-

ملخص المحتوى في الصفحة رقم 2

ASSEMBLY 1. Install (a section) of header assembly from top side with gasket and 9 hardened washers (supplied in kit), using factory bolts/nuts as applicable. 2. Install secondary section (B section) to (A section) top half using the three 10mm. Bolts and lock washers with the two crush ring gaskets (all supplied in kit). Use anti-seize on threads. (The two crush rings should be installed with the seam or split down towards B-section). 3. With donut in place, connect header to catalytic conve