Edelbrock 67362 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Edelbrock One-Piece Pro-Flo Header
For 1999-2000 Honda Civic SI
Catalog #67362
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Pro-Flo Header. They provide general guidelines to
be studied and understood before you remove your stock system. Failure to follow these instructions may void your
warranty. If you have any questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from 7
am – 5 pm, Monday through Friday, Pacific St

ملخص المحتوى في الصفحة رقم 2

DISASSEMBLY (Continuation) ASSEMBLY 7. Remove the bolt that is attached to the engine 1. Install the header assembly from bottom side block in the lower section of manifold. Remove with gasket and 9 hardened washers (supplied bolts from manifold at cylinder head and pull in kit), using factory bolts/nuts as applicable. manifold out from top side. Note: Save all factory Use anti-seize on threads. nuts, bolts and springs to be used during re- assembly. 2. With donut in place, connect header to