Edelbrock 6510 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

EDELBROCK HEADER - CATALOG #6510
for 1996-1999 Pick-Up, 5.0L, 5.7L V8 CPI without A.I.R. &
1996-1999 Suburban, Blazer, Tahoe, Jimmy, Yukon, 5.0L,
5.7L CPI without A.I.R.
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your Headers. If you have any questions or problems, please
call our Technical Hotline at: 1-800-416-8628 from 7:00 am - 5:00 pm, Monday-Friday, Pacific Standard Time or e-
mail us at edelbrock@edelbrock.com. Please fill out and mail your

ملخص المحتوى في الصفحة رقم 2

Left Side ASSEMBLY OF EXHAUST PIPE 1. Disconnect spark plug wires from spark plugs. 1. Using supplied hardware and new donut gaskets 2. Disconnect E.G.R. tube from rear of manifold. on both sides, re-attach the factory extension (Stock E.G.R. adapter fitting will be re-used.) pipes to the headers, and tighten bolts evenly to 3. Disconnect temperature sensor wire. ensure a tight seal. 4. Unbolt and remove manifold from top side. 2. Re-connect O2 sensors. Route O2 sensor wire 5. Install flange ga