Edelbrock 65063 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

EDELBROCK RETRO-FIT HEADER SYSTEM
For GM Bodies: A ‘64-’67, ‘68-’72; F ‘70-’81; and X ‘75-’79
®
Catalog #65063, 65073, 65083, 65123
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Edelbrock Retro-Fit LS1 Header System. If you have any
questions, please contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail
us at Edelbrock@Edelbrock.com.
IMPORTANT NOTE:
Proper installation is the responsibility

ملخص المحتوى في الصفحة رقم 2

INSTALLATION PROCEDURE 1. Raise and support vehicle at least 16” off of the ground. 2. Remove any existing exhaust manifold and or pipes that will interfere with the installation of the headers. 3. On some vehicles, it may be necessary to remove the steering shaft. Mark its orientation to the connector at the steering box, remove clamp bolt, and slide shaft off of the steering box input shaft. 4. Install the headers on to the engine using the supplied gaskets, bolts, and washers. Install all the