Edelbrock 5708 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

EDELBROCK CAT-BACK EXHAUST SYSTEM
For 2000-2006 Toyota Tundra 3.7L & 4.7L V8, 2WD & 4WD
Catalog #5708
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Edelbrock Cat-Back Exhaust System. If you have any
questions, please contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard
Time or e-mail us at Edelbrock@Edelbrock.com.
Suggested Tools for Installation:
❑ 3/8" ratchet set and metric sockets ❑ 9/16” and 15mm wren

ملخص المحتوى في الصفحة رقم 2

ASSEMBLY 2. Slip the muffler onto the intermediate pipe with a 3” band clamp on the front. NOTE: Inlet end of muffler 1. If using original resonator, use 2-1/2” band clamp on is marked. Snug the clamp so you can adjust the end of I-pipe, #25-3248 and install over cut end of system later. resonator pipe, slip hanger into rubber isolator. I- pipe #25-3248 must slide into resonator pipe a 3. Install muffler hanger assembly #23-4081 into minimum of 2”. muffler rubber isolators from the front of isol