Edelbrock 5486 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PERFORMER BUICK V6 INTAKE MANIFOLD
For Buick 231-252 C.I.D. V6 Engines
Catalog #5486
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools
and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing
this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any q

ملخص المحتوى في الصفحة رقم 2

INSTALLATION NOTE: There is a T-45 Torx bolt located at the front of the stock intake manifold. This bolt requires a special socket and will need to be removed before removing the intake manifold (See Fig. 1). 1) Use only recommended intake gaskets set when installing this intake manifold. 2) Fully clean the cylinder head intake flanges and the engine block end seal surfaces. 3) Apply Edelbrock Gasgacinch sealant P/N 9300 to both cylinder head flanges and to the cylinder head side of the gaske