Edelbrock 5280 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TORQUE ARM #5280
For 1984-2002 Camaro/Firebird

INSTALLATION INSTRUCTIONS
Please read and study these instructions before installing your new torque arm. If you have any questions,
please contact us at our Technical Hotline: 1-800-416-8628, 7:00 am – 5 pm, Monday through Friday, Pacific
Standard Time.
Viewed From Rear of Transmission
• NOTE:
This torque arm is designed to fit
Lip Lip
1984-2000 Camaro/Firebird with
front torque arm locator lips
facing away from driveshaft.

ملخص المحتوى في الصفحة رقم 2

6. Drill or grind off rivet heads (Figure 2) and Outer Bracket Inner Bracket disassemble bracket. Remove O.E.M. bushing from bracket assembly. 7. Install inner bracket onto transmission. Rivet Rivet Rivet Rivet 8. Place the new torque arm under vehicle and onto rear end with factory bolts and washers. Use supplied washers between rear end housing and torque arm bracket, only if needed. Use thread-locking compound. Leave bolt loose at this time. 9. Grease inside of new p