Edelbrock 5282 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ADJUSTABLE TORQUE ARM
for 1984-2002 Camaro / Firebird
Catalog #5282
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new adjustable torque arm. If you have any questions,
please contact our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at edelbrock@edelbrock.com. Please fill out and mail your warranty card.
IMPORTANT NOTE: Proper installation is the responsibility of the installer.

ملخص المحتوى في الصفحة رقم 2

has a job and relies on the other components to do BEFORE YOU GET STARTED their jobs. The installation of a high performance Before you begin the installation of your new adjustable torque arm alone will not mask worn or inferior torque arm, it is very important that you inspect several components. Use of an adjustable panhard rod components on your vehicle for safety reasons, to like Edelbrock (#5222) will allow you to re-center eliminate potential problems and to ensure your new your rear ax

ملخص المحتوى في الصفحة رقم 3

4. Drill or grind off the rivet heads (See Fig. 2) and 7. Apply supplied grease to the inside of the new disassemble bracket assembly and discard the front bushing and slip onto the torque arm with factory rubber bushing. the part number on the bushing facing the rear of the vehicle. 8. Position the polyurethane bushing in the inner bracket and install the outer bracket, then (using thread locking compound) install the upper bolt and tighten both bolts and stud to factory specifications. 9. At t