Edelbrock 5255 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Edelbrock Adjustable Trailing Arms
Catalog #5255
1979-2004 Mustang
Installation Instructions
Please study these instructions carefully before installing your new Adjustble Trailing Arms. If you have any questions,
contact our Technical Hotline at: 1-800-416-8628, 7 am to 5 pm, Monday-Friday, Pacific Standard Time or
e-mail us at edelbrock@edelbrock.com.
Tools and Supplies Required:
q Floorjack
q Jackstands
q Tire chocks
q Lug wrench
q 18mm socket, combination wrench, and torque wrench
q Blue L

ملخص المحتوى في الصفحة رقم 2

DIFFERENTIAL BUSHING INSTALLATION Note: The bushings supplied with these arms are designed to be used with the original differential bushing shells. Do not press out bushing shells. 1. Remove rubber and the inner sleeve from outer bushing shells. 2. Clean original shells thoroughly. 3. Using special pre-lube teflon grease, lube the I.D. and flange of the O.E. bushing shell. 4. Lightly grease O.D. and I.D. of polyurethane bushing. 5. Install bushing into shell. 6. Grease O.D. of steel