Edelbrock 3827 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Edelbrock 5.0 Mustang 65mm, 70mm, 75mm
Throttle Body & EGR Plates
Catalog #3824/3827; #3825/3828; #3826/3829
INSTALLATION INSTRUCTIONS
• Please study these instructions carefully before installing your new Throttle Body and
EGR Plate. If you have any questions or problems, do not hesitate to call our
Technical Hotline at: (800) 416-8628 from 7:00 am to 5:00 pm, Monday through
Friday, Pacific Standard Time or e-mail us at: edelbrock@edelbrock.com.
• These parts are street legal in all 50 stat

ملخص المحتوى في الصفحة رقم 2

c. Disconnect the idle speed control solenoid connector. d. Run the engine until it is at operating temperature. e. Turn the throttle plate hard stop screw counter clockwise until the lowest factory idle speed setting (625 rpm) is obtained. Increased idle speed may be required if the engine has been modified. f. Turn the engine off and reconnect the idle speed control connector. 12. CHECK THE THROTTLE POSITION SENSOR VOLTAGE: Turn the ignition switch to the “ON” position but do not start the eng