ملخص المحتوى في الصفحة رقم 1
42-inch 3D-Intelligent Display
42-3D6C01/00
42-3D6W01/00
42-3D6C02/00
42-3D6W02/00
User Manual
Philips 3D Solutions
ملخص المحتوى في الصفحة رقم 2
Safety Instructions for 3D display Read and follow these instructions: 1. This product must be earthed. 2. Use only an approved power cord or interconnection cable. 3. Unplug the product if you are not going to use it for a long period of time. 4. Unplug the product if you need to clean it, use a slightly damp cloth. Never use alcohol, solvents or ammonia-based liquids. 5. Refer all servicing to qualified service personnel 6. Do not block any ventilation holes. 7. To avoid
ملخص المحتوى في الصفحة رقم 3
Warning this is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
ملخص المحتوى في الصفحة رقم 4
Document Information Info Content Title 42 inch 3D Display, User Manual (9922 159 01 73 1 080923) Date 23 September 2008 Security The material and the information contained herein are proprietary to Philips 3D Solutions. Copying, reproduction, adaptation, modification or dissemination in whole or part is not permitted without the prior written consent of Philips 3D Solutions. Contact Philips 3D Solutions address High Tech Campus 27 5656 AE Eindhoven The Netherlands, E-mail su
ملخص المحتوى في الصفحة رقم 5
Display User Manual 3D Solutions Table of Contents 1 Introduction ............................................................................................................................................................................. 6 2 Product features ...................................................................................................................................................................... 7 2.1 Global product features ...........................
ملخص المحتوى في الصفحة رقم 6
Display User Manual 3D Solutions 1 Introduction The 42-inch 3D display from Philips 3D Solutions offers state-of-the-art lenticular lens design creating a variety of distinct autostereoscopic views. By this the viewer will benefit from the multi-user experience along with a large comfort zone. The 42-inch 3D display is specifically designed for a wide range of applications such as digital signage and information provision. The display is featuring superior lens design and 3D rende
ملخص المحتوى في الصفحة رقم 7
Display User Manual 3D Solutions 2 Product features 2.1 Global product features Multi-view Lenticular Display o 9 view autostereoscopic 3D display o Non-switchable lenticular technology o Optimal viewing distance: 3 meters (10 feet). o Wide comfort zone for 3D perception o Full brightness, full contrast 1 o 2D-plus-Depth or Declipse input in 3D mode o Protective plate at the front side of the display Advanced display signal processing engine o Integrated 3D display processin
ملخص المحتوى في الصفحة رقم 8
Display User Manual 3D Solutions 2.2 Technical aspects and details Group Item 42-3D # LCD Type TFT LCD panel Resolution 1920 x RGB x 1080 Pixel pitch 0.4845 mm x 0.4845 mm Effective viewing area 930.24 mm x 523.26 mm Size 42’’ Contrast Ratio 1500:1 Aspect Ratio 16:9 2 Brightness 500 cd/m Response time 8 ms (gray-to-gray) Refresh rate 60 fps Display colors 16.7 M (8 bits RGB) White chromaticity Wx: 0.280 Wy: 0.285 (at 10500°K) Physical Weight (including table 42
ملخص المحتوى في الصفحة رقم 9
Display User Manual 3D Solutions 2.3 Cosmetic specifications 2.3.1 Description This specification standard is applicable to: 3D-displays supplied by Philips 3D Solutions. 2.3.2 Environmental conditions of inspection The environmental conditions and visual inspection shall be conducted as below. o Ambient temperature in the range 15-25 [ C]. Humidity in the range 25-75 [%RH]. The functional inspection distance of the monitor (measured between the monitor and the inspector’s sight)
ملخص المحتوى في الصفحة رقم 10
Display User Manual 3D Solutions 2.3.4 Inspection Criteria Definition of dot defect: If the size of a dot defect is larger than 0.5 times a single pixel, it can be regarded as one dot defect Bright dot: Dot appears bright and the size is fixed in a black pattern. Dark dot: Dot appears dark and the size is fixed in pure red, green and blue pattern. 2.3.4.1 Display defects The size of a circular area is defined by the average of the size along the horizontal axis (=a) and the vert
ملخص المحتوى في الصفحة رقم 11
Display User Manual 3D Solutions Advanced Timing Horizontal pixels Front porch 152 Sync width 48 Back porch 48 Scan rate 67.02 kHz Sync polarity + Active lines 1920 Vertical lines Front porch 5 Sync width 5 Back porch 26 Refresh rate 60.054 Hz Sync polarity + Active pixels 1080 Pixel clock 145.30 MHz Signals must comply with the following DVI standard:Digital Visual Interface DVI Digital Display Working Group Revision 1.0; April 02, 1999 23 September 2008
ملخص المحتوى في الصفحة رقم 12
Display User Manual 3D Solutions 3 Scope of supply, Set up and mounting 3.1 Scope of Supply The contents of the box: o Display 42-3D # o Table stand o 3 Mains cords (USA, EU and UK) o DVI cable o CD ROM with: Display Control Tool 3DS Media Player User manuals 2 3D Sample content o Printed version of the Display user manual (this manual) o Cardboard box with cushions The following items can be purchased separately: o Mounting bracket (Article code: 42-WM) 3.2 Imag
ملخص المحتوى في الصفحة رقم 13
Display User Manual 3D Solutions 3.4 Mounting The display can be placed on a table stand or wall-mounted. The table stand is supplied as standard; the mounting bracket can be purchased separately. This bracket can also be used as an adapter in combination with universal wall supports, ceiling supports or universal floor stands (e.g. Vogel’s Professional). 3.4.1 Fitting the table stand Only use the stand supplied with the set, making sure that the fasteners are properly tightened.
ملخص المحتوى في الصفحة رقم 14
Display User Manual 3D Solutions 3.6 Connecting the display NEVER (dis)connect DVI when your PC or Display is on. 2D monitor (optional) DVI cable DVI cable PC 3D Display Power cord A second 2D display may be connected to the PC. Only use a DVI cable and graphics card that is compliant with the DVI standard (see reference to DVI standard in Error! Reference source not found.) The picture below show the DVI-connector and power connector on the back of the display 1 2 M
ملخص المحتوى في الصفحة رقم 15
Display User Manual 3D Solutions 3.7 Cleaning instructions Before cleaning the display, disconnect the power cord and DVI cable. It is preferable to clean the front of the display with the cleaning products listed in the table below. To clean we recommend: cleaning materials e.g. soft cotton cloth window leather Aqueous solution, neutral and weakly e.g. Flux alkaline window cleaner without Ajax additives of abrasive substances: Permitted portion of ammonia < 5 Vol-%, as well a
ملخص المحتوى في الصفحة رقم 16
Display User Manual 3D Solutions 3.8 Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules an
ملخص المحتوى في الصفحة رقم 17
Display User Manual 3D Solutions 4 Software installation This chapter contains the prerequisites for the PC hardware and the operating system for the software. First, check whether your PC complies with the requirements that are given in the next sections. Then follow the installation instructions, where you will be guided step by step through the software installation procedure. 4.1 Minimum PC requirements The PC must comply with the following requirements: o Pentium 4, ≥ 3 GHz o
ملخص المحتوى في الصفحة رقم 18
Display User Manual 3D Solutions 5 Approbations 5.1 CE EN 60950-1:2001 EN 55022: 1998-09; cor 1: 1999-08; A1: 2000-10; A2: 2003-01; cor 2: 2003-07 EN 55024: 1998-09; A1: 2001-10; A2: 2003-01 EN 61000-3-2: 2000-12 EN 61000-3-3: 1995-01; A1: 2001-06 5.2 USA and Canada cETLus listing UL 60950 Can/CSA 60950 FCC part 15B: 2004-10 Class A ANSI C63.4: 2001; 2003 5.3 CB Certificate st IEC 60950-1: 2001 (1 edition) IEC 61000-3-2: 2000-08; A1: 2001-08; A2: 2004-10 IEC 61000-3-3
ملخص المحتوى في الصفحة رقم 19
Display User Manual 3D Solutions 6 Environmental Condition Operating Shipping / storage Temperature 0 °C to 35 °C -20 °C to 60 °C Humidity 20 % - 80 % 0% - 95 % No condensation No condensation Air pressure 600 – 1100 mBar 300 – 1100 mBar The display is only used indoor. 23 September 2008 ©2008 Philips Electronics Nederland B.V. 19 of 26
ملخص المحتوى في الصفحة رقم 20
Display User Manual 3D Solutions 7 Interfaces 7.1 DVI-in Pin Signal Pi Signal Pi Signal n n 1 T.M.D.S. 9 T.M.D.S. 17 T.M.D.S. Data2- Data1- Data0- 2 T.M.D.S. 10 T.M.D.S. 18 T.M.D.S. Data2+ Data1+ Data0+ 3 T.M.D.S. 11 T.M.D.S. 19 T.M.D.S.Dat Data2/4 Data1/3 a0/5 Shield Shield Shield 4 No 12 No 20 No connect connect connect 5 No 13 No 21 No connect connect connect 6 DDC 14 +5V 22 T.M.D.S. Clock Power Clock Shield 7 DDC Data 15 Ground 23 T.M.D.S. Clock+
