ملخص المحتوى في الصفحة رقم 1
Model PRO 9232S
OWNER’S MANUAL
KEYLESS ENTRY ALARM UPGRADE MODULE
Congratulations on your purchase of the PRO 9232S automotive Keyless Entry
Upgrade Alarm System. The PRO 9232S is a state -of -the-art auto security system
that is designed to automatically arm and disarm when it receives a command from
your existing Factory Keyless Entry Transmitter. Taking a few moments to read this
manual will help to ensure that your vehicle is protected at all times.
ARMING THE SYSTEM: (ACTIVE)
1. Turn the i
ملخص المحتوى في الصفحة رقم 2
3. In 30 seconds, you will hear a single short chip from the siren, and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed. 4. It is possible to program the system, that when the alarm is allowed to automatically passive arm, there will be a 15-second delay after a door is opened before the alarm will sound. However, if the system i
ملخص المحتوى في الصفحة رقم 3
DISARMING THE SYSTEM: 1. As you approach the vehicle, press and release the unlock button on the keychain transmitter. 2. The siren and or horn will beep two times, the parking lamps will flash two times, and the red dash mounted LED will turn off, indicating that the system is DISARMED. If the optional entry illumination feature has been installed, the vehicle’s interior lights will turn on for 30 seconds, or until the ignition key is turned on. NOTE: If your system has been programmed for “
ملخص المحتوى في الصفحة رقم 4
USING THE VALET SWITCH: The valet switch allows you to temporarily bypass all alarm functions, eliminat- ing the need to hand your transmitter to parking attendants or garage mechan- ics. When the system is in valet mode, all alarm functions are bypassed, how- ever the remote panic feature and remote door locks will remain operational. To use the valet mode, the system must first be disarmed either by using your keychain transmitter, or by activating your personalized manual override code. TO EN
ملخص المحتوى في الصفحة رقم 5
4. Within 10 seconds of turning the ignition switch on, begin to enter units digit of override code. (In this example the code is 11, so press and release the Valet/Override pushbutton one time). 5. Within 5 seconds after the last units digit is entered, turn the ignition switch off, then on, and start your vehicle. If the manual override code is entered properly, the unit stops sounding, the LED turns off, indicating a successful override. The system is now disarmed and you can start and ope
ملخص المحتوى في الصفحة رقم 6
pattern reports the previously stored code, the new code was not entered correctly. Please repeat steps 1 through 7 above considering the following. NOTE: Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths. NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last success fully stored code.
ملخص المحتوى في الصفحة رقم 7
NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last success fully stored code. ADDITIONAL REMOTE FUNCTION: This system allows the control of any one of the following optional accessories; Remote Car Starter Remote Window Closure Remote Window Open To operate the optional accessory; 1. Press the lock, then unlock, then lock buttons on your keychain transmit ter within 3 secon
ملخص المحتوى في الصفحة رقم 8
PRO 9232S SYSTEM FUNCTIONS AT A GLANCE DASH L.E.D. INDICATORS RAPID FLASHING .......................................................... PASSIVE ARMING SLOW FLASHING ........................................................................... ARMED OFF ........................................................................................... DISARMED ON - SOLID ............................................................................ VALET MODE 3 FLASH ... PAUSE .....................
