Schumacher PRO-SERIES PS-1562A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DSR Pro-Series™ Maintainer
 1.5 Amp Charger and Maintainer
 Fully Automatic – once battery is charged, unit
switches from Full Charge to Float-Mode
Monitoring
 Microprocessor Controlled & Auto Voltage
Detection
 Automatic Temperature Compensation
 Thermal Runaway Protection
 Quick-Disconnect Harness
 Utilize ring connector and only hook harness
Model PS-1562A
up once
 No need to remove battery again to charge
 Both the 50-Amp clamp & ring connectors
snap into place in seconds

ملخص المحتوى في الصفحة رقم 2

DSR Pro-Series™ Mountable Maintainer  1.5-AMP Trickle Charge Rate - charges in 2 to 12 hours  Fully Automatic – once battery is charged, unit switches from Full Charge to Float-Mode Monitoring  LED Lights - indicate Power On and Charged  Reverse-Hookup Protection  Molded Plastic Case  “On-Board” Features – comes complete with hardware & bracket to mount charger next to battery Model PSC-15A-OB  Short Leads for Safety – won’t get tangled in moving engine parts

ملخص المحتوى في الصفحة رقم 3

DSR Pro-Series™ Metal Hand-Held Battery Charger Model PS-620 Model PS-1022MA  10-Amp Fast Charge – perfect for everyday charging  6-Amp Medium Charge – ideal for most needs. Charges in 3 to 5 hours everyday needs, charges most batteries in 6 to  2 amp Trickle Charge – charges a small 12 volt battery in 8 hours 2 to 12 hours  2-Amp Trickle Charge – charges a small 12  Fully Automatic/ Manual Operation volt battery in 2 to 12 hours  LED – signals Fully Charged  Manual Operation  F

ملخص المحتوى في الصفحة رقم 4

DSR Pro-Series™ Metal Battery Charger/Starter Model PS-2100MA Model PS-1025  100-Amp Engine Start – for emergency starting  15-Amp Fast Charge – charges a battery in 2 to 4  50-Amp Engine Start – for emergency starting hours  10-Amp Fast Charge – good for everyday charging  2-Amp Trickle Charge – charges a small needs. Charges in 3 to 5 hours 12 volt battery in 2 to 12 hours  2-Amp Trickle Charge – charges a small 12 volt battery in  Fully Automatic/ Manual Operation 2 to 12 hours 

ملخص المحتوى في الصفحة رقم 5

DSR Pro-Series™ Specialty Hand-Held Battery Charger  200-Amp 12V Engine Start – for emergency starting  30-Amp 6V & 12V Charge – for very fast charging - charges in 1 to 3 hours  10-Amp 12V Fast Charge – for everyday charging needs – charges in 3 to 5 hours  Manual Operation  Extra Long 9-Foot Power Cord– 120V line cord for extended reach  6-Foot, 4 Gage TPE Welding Grade Battery Cables – with epoxy coated 400- Amp steel clamps and copper jaws Model PSC-2516A Model PSC-2030T  5-Func

ملخص المحتوى في الصفحة رقم 6

DSR Pro-Series™ Hybrid Hand-Held Battery Charger/Starter  125-Amp Engine Start – for quick starting  15<>40-Amp Fast Charge  2-Amp Slow Charge – for charging small batteries, warming large ones  Fully Automatic  Float-Mode Monitoring – keeps battery at optimum charge level by providing just enough power to keep the battery maintained at the proper voltage and starts automatically after charging in all charge rates  Battery and Alternator Tester – helps diagnose electrical system pro

ملخص المحتوى في الصفحة رقم 7

DSR Pro-Series Wheel-Style Battery Charger/Starter  200-Amp Engine Start – for emergency starting  35-Amp Rapid Charge – charges in 1 to 3 hours  2-Amp Trickle Charge – charges a small 12V battery in 2 to 12 hours  Manual Operation  “Off” Position Switch  Rugged – durable metal case Model PSW-2035

ملخص المحتوى في الصفحة رقم 8

DSR Pro-Series™ Heavy-Duty Wheel-Style Battery Charger/Starter  Manual Operation  135 Minute Timer with “Hold” Position – for precise control of the charge duration, charger shuts off after timer expires Model PSW-2550  Extra Long 9-Foot Power Cord– 120V line cord for extended reach  6 ft, 4 ga, TPE Welding Grade Battery Cables – with epoxy coated  250-Amp 12V/125-Amp 6V 400-Amp steel clamps and copper jaws Engine Start – for emergency engine starting  Durable Construction with Tubul

ملخص المحتوى في الصفحة رقم 9

DSR Pro-Series™ Heavy-Duty Wheel-Style Battery Charger/Starter  Manual Operation  Durable Construction with Tubular Chrome Handle  Large Face, Clear View Meters – are easy to read  Ammeter  High Efficiency Fan Cooling System  Heavy Duty Voltage and Rate Control Switches  Automatic Overload Reset/ Short Circuit Protection  Rugged – durable metal case with Model PSW-22 powder coat finish Model PSW-7700  300-Amp 12V Engine Start – for  225-Amp 12V/125-Amp 6V emergency starting En

ملخص المحتوى في الصفحة رقم 10

DSR Pro-Series™ Battery/Charging System Analyzer • 100 Amp Digital Battery Tester • Microprocessor Controlled • CCA Range 200-1200 • Operating voltage range 8 to 16V • An easy-to-read digital display & user prompts to ensure simple & accurate operation • Field proven, high quality design for long life • Research based diagnostic algorithm provides accurate assessment of the battery & recommended action to the user Model PST-100

ملخص المحتوى في الصفحة رقم 11

DSR Pro-Series™ Battery/Charging System Analyzer  200 Amp Digital Battery Load Tester  Microprocessor Control – makes for an easy and accurate load test with no need to time yourself  Bright, LED Digital Display – indicates both voltage and test results  Unique 3-Step Design – LED polarity check function, battery load test and charging system test readout  Automatically Turns Off the Load – after 10 seconds and locks the voltage  Super-Grip Battery Clamps – heavy-duty and color-co

ملخص المحتوى في الصفحة رقم 12

DSR Pro-Series™ Carbon Pile Battery/Charging System/Starter Analyzer  500-Amp Variable Load Carbon Pile Tester – for 12V batteries, alternators, regulators and starters  Separate Voltmeter and Ammeter – provides easy-to-monitor battery load tests  Color-Coded, Temperature Compensation Pass/Fail Bands on Voltmeter – insures precise battery load test results  Tests batteries up to 1,000 CCA  Super-Grip Battery Clamps – fully insulated, heavy-duty and color-coded with wire leads  Baked

ملخص المحتوى في الصفحة رقم 13

DSR Pro-Series™ Electronic Battery Bus Bar for Parallel Charging  Charges multiple battery systems at the same time when hooked up to a battery charger  Enables simultaneous recharging of up to 6 batteries  Built-in test circuit and LED verify proper connection and polarity  Heavy-Duty, 10-Gauge battery cables are 5- feet long and will carry up to 30 amps.  Color-coded and insulated clamps  Insulated backboard allows unused clamps to be safely stored  Threaded, side-terminal adapter

ملخص المحتوى في الصفحة رقم 14

DSR Pro-Series™ Jump Starter  1800 Peak Amps  280 Cranking Amps  225 Cold Cranking Amps  18 Ah Professional-Grade, High-Output AGM Battery  Built-in, Automatic Charger  Two-Function Digital Display  12-Volt DC Power Outlet  4-Gauge, 28-Inch Cables  Heavy-Duty Clamps have Replaceable Copper Jaws  Durable, Rust & Corrosion Proof, Polypropylene Case  Vented Case for Added Safety Model PSJ-1812

ملخص المحتوى في الصفحة رقم 15

DSR Pro-Series™ Heavy Duty Jump Starters  3-Amp Built-in, Automatic Charger  ON/OFF Switch  Reverse Hook-Up Protection with Alarm Alert  Two-Function Digital Display  12-Volt DC Power Outlet  Heavy-Duty Clamps - Replaceable Copper Jaws  Durable, Rust & Corrosion Proof, Polypropylene Case  Unique, High-Impact Protective Base  Vented Case for Added Safety Model PSJ-3612 Model PSJ-2212  2200 Peak Amps  3600 Peak Amps  330 Cranking Amps  470 Cranking Amps  275 Cold Cranking Amps 

ملخص المحتوى في الصفحة رقم 16

TM DSR Pro-Series DC to AC Power Inverters & Accessories  Two 120V GFCI Outlets – with built-in circuit breaker and reset switch  Two Built-In, High-Speed Cooling Fans – helps keep the unit cool for consistent operation  Low Battery Alarm – protects Power Source Battery & reduces surprise shutdown  Surge Protection – protects against damaging current fluctuations  High-Grade Thermal Protection –shuts unit down if operating temperature is excessive  On/Off Switch and LED Indicator  He