Sony DMX-NV1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DMX-NV1
Attachment Guide
For TV Models: KDL-40WL140/KDL-46WL140/KDL-52WL140
Required Items for Assembly
Your Sony TV with XMB (1) / BRAVIA Internet Video Link (DMX-NV1) (1)/ Cable Cover (1)/ Mounting
®
™
Bracket (1)/ Plastic Fastener (2)/ Mounting Knob (2)/ Phillips Screwdriver (for removal only; not supplied)
To Begin
On the back of the TV, locate the attachment holes situated on the right side, above the rear input panel.
These instructions are shown without cables attached. We recommend tha

ملخص المحتوى في الصفحة رقم 2

3 Insert the Mounting Knobs into the threaded holes 4 Place the bottom Mounting Knob into the hole on the and lightly twist by hand. Do not fully tighten the bracket, leaving the top Mounting Knob sitting above Mounting Knobs. the top hole. Cables thread out on this side 5 Push down the receiver so both Mounting Knobs To Remove the Mounting Bracket are locked into the grooves, then fully tighten the Mounting Knobs by hand. Follow the steps in reverse order. Use a Phillips Screwdriver to