ملخص المحتوى في الصفحة رقم 1
2-345-277-01(1)
LCD Multi
Function Display
MFM-HT75W
MFM-HT95
© 2004 Sony Corporation
ملخص المحتوى في الصفحة رقم 2
Owner’s Record NOTICE This notice is applicable for USA/Canada only. The model and serial numbers are located at the rear of the unit. If shipped to USA/Canada, install only a UL LISTED/CSA Record these numbers in the spaces provided below. Refer to them LABELLED power supply cord meeting the following whenever you call upon your dealer regarding this product. specifications: Model No. Serial No. SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord
ملخص المحتوى في الصفحة رقم 3
Table of Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Setup 1: Open the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup 2: Connect the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup 3: Connect
ملخص المحتوى في الصفحة رقم 4
Parent menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Activating the Parental Control feature . . . . . . . . . . . . . . . . . . 25 Selecting a Custom Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 What the Ratings Mean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Option menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Setting “PIP” (Picture In Picture) (for PC 1/PC 2 only) . . . . . .
ملخص المحتوى في الصفحة رقم 5
Do not push on or scratch the LCD screen. Do not place a heavy Precautions object on the LCD screen. This may cause the screen to lose uniformity or cause LCD panel malfunctions. Warning on power connections If the display is used in a cold place, a residual image may Use the supplied power cord. If you use a different power cord, appear on the screen. This is not a malfunction. The screen be sure that it is compatible with your local power supply. returns to normal as the temperature
ملخص المحتوى في الصفحة رقم 6
For customers in the United States This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance qd (http://www.eiae.org). Installation on a wall or a mounting arm If you intend to install the display on a wall or a mounting arm, be sure to consult qualified personnel. A Remote control sensor This sensor receives a signal from the remote
ملخص المحتوى في الصفحة رقم 7
M Connector cover (page 9) P PC 1 connectors Remove this cover when you connect cables or cords. 1 DVI-D input connector (digital RGB) for PC 1 (page 9) Rear of the LCD display This connector inputs digital RGB video signals that comply with DVI Rev.1.0. 2 Audio input jack for PC 1 (page 9) This jack inputs audio signals when connected to the audio output jack of a computer or other equipment connected to PC 1. Q PC 2 connectors 1 HD15 input connector (analog RGB) for PC 2 (page 9) This co
ملخص المحتوى في الصفحة رقم 8
TV (page 14): Press to select the TV input. Remote control C Feature buttons (Picture Mode) (page 35): Press repeatedly to step through the Picture Mode. 8 (Zoom) (page 22): Press repeatedly to step through the “Zoom” settings. 9 (PinP) (page 30): MUTING DISPLAY SLEEP 1 Press repeatedly to step through the 1 0 “PIP” settings. PC1 PC2 VIDEO1 VIDEO2 2 D MENU button (page 15) TV Press to turn the menu screen on and off. 3 MENU E 0-9 buttons (page 14) 4 Use these buttons to input numbers.
ملخص المحتوى في الصفحة رقم 9
Remove the connector cover. Push the hooks and draw the connector cover towards you. Setup Before using your display, check that the following items are included in your carton: LCD display Remote control Size AAA batteries (2) Power cord connector cover HD15-HD15 video signal cable (analog RGB) DVI-D video signal cable (digital RGB) Audio cord (stereo miniplug) 75-ohm coaxial cable CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.) Warranty card x
ملخص المحتوى في الصفحة رقم 10
To connect to an IBM PC/AT or compatible computer x Connecting video equipment using the VIDEO 1 jacks If you intend to connect video equipment that has component video output jacks, such as a DVD player, follow the instructions below. to the Using a video signal cable (not supplied) and an audio audio input to the HD15 cord (not supplied), connect the video equipment to the for PC 2 input display’s VIDEO 1 jacks. Y rear of the display P B P R audio cord (supplied) component video cable
ملخص المحتوى في الصفحة رقم 11
x Connecting video equipment using the x Connecting an antenna VIDEO 2 jacks If you intend to connect an antenna to receive the TV signal, follow the instructions below. If you intend to connect video equipment that has composite/S Using the 75-ohm coaxial cable (supplied), connect an video output jacks, such as a VCR, follow the instructions below. antenna to the display’s VHF/UHF jack. Using a video signal cable (not supplied) and an audio cord (not supplied), connect the video equipment t
ملخص المحتوى في الصفحة رقم 12
Setup 3:Connect the power cord Setup 5:Turn on the display and other equipment 1 Connect the supplied power cord securely to the display’s AC IN connector. 1 Press the 1 (power) switch on the front of the display. 2 Connect the other end securely to a power outlet. The 1 (power) indicator lights up in green. CH lights in green 1 to AC IN 2 to the power outlet 2 Turn on the computer or other video equipment. power cord (supplied) 3 Press the button to select the desired input signal. Setup
ملخص المحتوى في الصفحة رقم 13
If no picture appears on the screen Setup 6:Adjust the tilt Check that the power cord and the video signal cable are properly connected. This display can be adjusted within the angles shown below. If “No Input Signal” appears on the screen: Grasp the sides of the LCD panel, then adjust the – The computer is in the power saving mode. Try pressing any screen angles. key on the keyboard or moving the mouse. – Check that the input signal setting is correct by pressing the button (page 12).
ملخص المحتوى في الصفحة رقم 14
Skipping unnecessary channels Watching the TV You can skip unnecessary channels when selecting channels using the CH +/– button. Setting the TV channels 1 Press the MENU button. To watch TV programs, you need to run “Auto Program” to set up your channels. 2 Press the M/m buttons to select (Channel) and Perform the following “Auto Program” procedure before you press the OK button. watch TV programs for the first time. The “Channel” menu appears on the screen. For details on the use of the me
ملخص المحتوى في الصفحة رقم 15
Using other features Customizing Your Display You can also use the following TV features. Before making adjustments x Watching TV programs with closed captions Connect the display and equipment, then turn them on. For the best results, wait for at least 30 minutes before making Set “Caption Vision” in the “Option” menu to “On.” For details, adjustments. see “Setting “Caption Vision” (for TV/VIDEO 1/VIDEO 2 only)” on page 32. You can make numerous adjustments to your display using the on-scr
ملخص المحتوى في الصفحة رقم 16
4 Adjust the item. 3 Select the item you want to adjust. Press the M/m buttons to make the adjustment, then press the Press the M/m buttons to select the item you want to adjust, OK button. then press the OK button. When you press the OK button, the setting is stored, then the display returns to the previous menu. OK OK , , If is one of the menu items. When you select and press the OK button, the display returns to 5 Close the menu. the previous menu. Press the MENU button once to return
ملخص المحتوى في الصفحة رقم 17
x Selecting the Picture Mode for TV/VIDEO 1/ Picture menu VIDEO 2 You can select the appropriate screen brightness for your purpose. You can adjust the following items using the “Picture” menu. Mode Picture DVI-D: PC 1 1 Press the MENU button. Backlight Mode: Movie The main menu appears on the screen. Backlight: 100 Contrast (Picture) Contrast: 70 Brightness: 50 Brightness Color: 2 Press the M/m buttons to select (Picture) and Hue: Sharpness: Color Color Temp.
ملخص المحتوى في الصفحة رقم 18
x Adjusting “Backlight” x Adjusting “Color” (for TV/VIDEO 1/VIDEO 2 If the screen is too bright, adjust the backlight to make the screen only) easier to see. You can change the color intensity of the picture displayed. 1 Press the MENU button. 1 Press the MENU button. The main menu appears on the screen. The main menu appears on the screen. 2 Press the M/m buttons to select (Picture) and 2 Press the M/m buttons to select (Picture) and press the OK button. press the OK button. The “Picture”
ملخص المحتوى في الصفحة رقم 19
The fine tuning menu for color temperature appears on the x Adjusting “Color Temp.” (for PC 1/PC 2 screen. only) You can select the picture’s color level for the white color field from the default color temperature settings. R 160 G 127 Also, if necessary, you can fine tune the color temperature. B 75 1 Press the MENU button. The main menu appears on the screen. 5 Press the M/m buttons to select R (Red) or B (Blue) and press the OK button. Then press the M/m 2 Press the M/m buttons to se
ملخص المحتوى في الصفحة رقم 20
x Resetting Picture Mode to the default x Setting “Dynamic Picture” (for TV/VIDEO 1/ You can reset the adjustments to the default settings. VIDEO 2 only) You can set the “Dynamic Picture” function to on or off. 1 Press the MENU button. This feature can be set for each available input. The main menu appears on the screen. 1 Press the MENU button. 2 Press the M/m buttons to select (Picture) and The main menu appears on the screen. press the OK button. The “Picture” menu appears on the screen. 2
