ملخص المحتوى في الصفحة رقم 1
EZ180
EZ180
High Resolution B/W Weatherproof Camera
High Resolution B/W Weatherproof Camera
User’s Manual
and
Operation Instructions
ملخص المحتوى في الصفحة رقم 2
Notice This manual is presented to the users of EZ180 by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared no effort to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice. All the components of the products, including accessories, components, and outlook, are based on th
ملخص المحتوى في الصفحة رقم 3
Table of Contents Safety Warning …………………………………………1 Introduction……………………………………………..2 Specification…………………………………………….3 Major Parts Names…..…………………………….…..4 Installation Instructions………………………….….…5 Settings………………………………………………….7
ملخص المحتوى في الصفحة رقم 4
Safety Warning 1. Handle the camera with care. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base. 2. Do not install the camera near electric or magnetic fields. Installed the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video
ملخص المحتوى في الصفحة رقم 5
Introduction The EZ180 series offers great performance in 1/3”image format B/W CCD camera. The EZ180 is ideal for outdoor applications such as parking lots, gas stations or shopping malls. The sophisticated circuit design provides a heater that turns on at 10℃ for cold weather. The EZ180 will provide protection against the elements and provide an excellent quality picture. Main Features : High Resolution: 560 TV Lines. Two types of built-in vari-focal lens for ver
ملخص المحتوى في الصفحة رقم 6
Specification EZ180 Pickup Device 1/3” SONY B/W CCD Picture Elements 768 x 494 (EIA) 752 x 582 (CCIR) Horizontal Resolution 560 TV lines Video Output BNC 1.0Vp-p, 75 ohm Lens Focal Length Vari-focal lens f=3.5~8mm Vari-focal lens f=9~22mm *Lens models and availability vary in different regions Sensitivity 0.1 lux/F=1.6 Gamma Correction 0.45 S/N Ratio Over 48dB (AGC off) Back Light Comp. On/Off switch Auto Gain Control On/Off switch Flickerless
ملخص المحتوى في الصفحة رقم 7
Major Parts Names and Their Functions Bac Back k Fi Fix xi in ng g Pl Pla at te e Swi Swiv ve el l Sc Scre rew w M Mo ou un ntin ting g Set-Screw Bas Base e Sun Shi Sun Shie el ld d As Ass se em mb bl ly y Cove Cover r Scr Scre ew w Fix Fixi in ng g Scr Scre ew w Fr Fro on nt t Fix Fixi in ng g Plat Plate e IR IRIS IS A AL LC C/ /L Le ev ve el l A Ad dj ju us st tm me en nt t O-ring O-ring S Se eal al Fo Focus cus Z Zoom oom Le Lens ns He
ملخص المحتوى في الصفحة رقم 8
Installation Instructions 1. Using the supplied screws, mount the bracket base on the desired location. 2. Connect the BNC connector of the camera to a monitor or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension. 3. Connect the 24VAC or 12VDC regulated power source of the camera (power jack) to the power-in jack with 2mm plug. For 12VDC power source, please make sure the power plug is center+ outer- for heater normal operation. 4.
ملخص المحتوى في الصفحة رقم 9
g. When all the adjustments and settings are completed, overlaying the cover gently. Be careful not to damage to the “O”-Ring and camera components. h. To reassemble the sun shield, match the hole on the sun shield to the back fixing plate of camera, Fix the screw on the front fixing plate. Make sure the wider side of the fixing plate holds the edge of the camera well. 5. Attach the camera onto the mounting bracket. 6. Loosen the swivel screw and point the camera to the desired d
ملخص المحتوى في الصفحة رقم 10
Settings The camera is set up at factory and normally requires no adjustments. Sometimes, however, adjustments may be necessary. Please refer to the following description for the function details. The IRIS ALC and IRIS Level adjustments are located on the side circuit board, use a screwdriver to adjust if it’s necessary. IRIS Level IRIS ALC Adjustment Adjustment Control Switches IRIS Level Adjustment To adjust brightness level – Turn the IRIS Level Adjustment V
ملخص المحتوى في الصفحة رقم 11
The 4 control switches are also located on the side circuit board, the switches in orders are for Flickerless, Back Light Comp, Auto Gain Control and Line Lock. Normal FL On On BLC Normal On On Off AGC On On Off LL On On Control Switches FL(Flickerless) Normal/On When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic shutter at 1/100(NTSC) or 1/120(PAL) automatically, and reduce the flicker immediately. The default sett
ملخص المحتوى في الصفحة رقم 12
AGC (Automatic Gain Control) Off/On AGC ON: The sensitivity increases automatically when light is low. AGC OFF: A-low-noise picture is obtained under a low light condition. The default setting is On. LL (Line-Lock) Off/On To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on). Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on, the camera’s vertical synchronization can be driven by the AC signal in the power li
ملخص المحتوى في الصفحة رقم 13
Head Office: Europe Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Albert-Einstein-Strasse 1 Hsi-Chih, Taipei, Taiwan D-46446 Emmerich, Germany TEL: +886-2-26982334 TEL: +49-2822-9394-0 FAX: +886-2-26982380 FAX: +49-2822-939495 www.everfocus.com.tw www.everfocus.de USA L.A. Office: China Office: 1801 Highland Ave. Unit A Room B-05D-1, KESHI PLAZA, Shangdi Duarte, CA 91010, U.S.A. Information Industry Base, Haidian District, TEL: +1-626-844-8888 Beijing, China 100085 FA
