ملخص المحتوى في الصفحة رقم 1
®
The company behind Python Auto Security Systems
is Directed Electronics.
Vista, CA 92081
www.pythoncarsecurity.com
Since its inception, Directed Electronics has had one
purpose, to provide consumers with the finest vehicle
security and car stereo products and accessories
available. The recipient of nearly 100 patents and
Innovations Awards in the field of advanced electronic
technology, Directed Electronics is ISO 9001 registered.
®
Quality Directed Electronics products are sold and ser
ملخص المحتوى في الصفحة رقم 2
Congratulations Congratulations on the purchase of your state-of-the-art security system. Reading this owner’s guide prior to using your system will help maxi- mize the use of your system and its many features. For more informa- tion please visit the below website: http://www.pythoncarsecurity.com – For general and additional guide information. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. What you get Welcome to the best
ملخص المحتوى في الصفحة رقم 3
Important information Your Warranty Your system comes with a warranty. Please make sure you receive the warranty registration card and proof of purchase from your dealer indicating the product was installed by an authorized Directed dealer. Your product warranty must be validated within 10 days of purchase. You can validate it online at www.prodregister.com/directed or com- plete and return the warranty registration card. Quick Reference Card Carry this card with you to reference your syst
ملخص المحتوى في الصفحة رقم 4
Contents Getting Started .................................................................................................... 3 Keys to using this manual ...................................................................... 3 Responder LE 2-Way ........................................................................................... 4 Using your System ............................................................................................... 6 Commands and Confirmations .................
ملخص المحتوى في الصفحة رقم 5
Trigger Zone Fault Report.................................................................... 22 Alarm Report ..................................................................................... 22 Nuisance Prevention (NPC) ................................................................. 23 Remote and System Operations .......................................................................... 24 Passive Arming* ................................................................................ 24
ملخص المحتوى في الصفحة رقم 6
Getting Started Keys to using this manual Specific actions (in bold type) and style conventions are used consis- tently throughout this manual, they are as follows: Press: implies pushing in and releasing a button. Hold: is used after “press” actions when a button needs to be held in position for an extended period of time, typically several seconds. Italicized words denote section/sub headings in this guide and can be located through the table of contents. An asterisk (*) when used after
ملخص المحتوى في الصفحة رقم 7
Responder LE 2-Way Internal Antenna Transmit LED Ghost Command LED’s Buttons AUX Function Button Feature Description Internal Antenna Used for transmitting and receiving* information Command Buttons (4) Used to perform arming, disarming, and auxiliary channel commands. Function Button Used to access function levels for commands, configuration menus for programming, and car selection. Ghost LED’s ** Each button has an associated LED next to it that are active during related operations. These L
ملخص المحتوى في الصفحة رقم 8
Control Center Control Center Button Control Center LED The control center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: The In-vehicle system antenna, for 2 way communication. The control center LED, as a visual indicator of the system’s sta- tus. The control center button, for placing the system into valet mode* and to perform the emergency override** operation. * See Remote and System
ملخص المحتوى في الصفحة رقم 9
Using your System Commands and Confirmations Commands, basic or advanced, are used to activate system features and are performed by pressing one of the command buttons. Ba- sic commands control the most often used security features while ad- vanced commands control more specialized features. Confirmations for basic or advanced commands are indicated first by siren chirps and parking light flashes, and then by illuminated Ghost LED’s and beeps or tones on the remote control. A description of eac
ملخص المحتوى في الصفحة رقم 10
Remote Control Command table Direct Access Level x 1 x 2 x 3 x 4 Button LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Arm/Lock Silent Arm Sensor Sensor Silent Full Silent (Panic) Bypass Arm Arm Disarm/Unlock Silent Disarm Remote Valet Car Finder Remote Start*/ Aux 1/4** AUX Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4 Advance Level, Arm Change Car Status *** (3 sec), Enter programming (8 sec) * Available only with optional remote start module installation ** This button can command either aux 1 or aux 4 if turned
ملخص المحتوى في الصفحة رقم 11
Basic Commands (Direct Access) No ghost LED’s on Arm Press and release The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. The arm LED and beeps play to confirm. If valet mode* is on, the doors lock and the arm LED, LED and a fault tone plays. Exit valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the remote will emit a trigger zone fault report**, the arm LED, LED and a fault tone plays. To A
ملخص المحتوى في الصفحة رقم 12
An alarm report** will replace the disarm output if the alarm was trig- gered; the siren will chirp 4 or 5 times, and the disarm LED, LED and 4 or 5 fault tones play to alert of the report. Remote Start /AUX1/AUX4 Press and release Remote Start*** Activates (or if on, deactivates) the remote starter. The engine and parking lights turn on or off accordingly. The rs/aux LED and on tones play, or the rs/aux LED and off tones play to confirm. AUX1/AUX4**** Activates (or if on, deactivates) the a
ملخص المحتوى في الصفحة رقم 13
Advanced Commands: (Level 1) Press and release the button 1 time. The LED illuminates indicat- ing Level 1 Note: The transmit LED on the 1-way remote will flash in groups of 1 to indicate level 1. Silent Arm Press and release The alarm arms, doors lock (if connected), and the parking lights flash once. The arm LED turns on to confirm. valet mode* or trigger zone fault report** messages may be received. Silent Disarm Press and release The alarm disarms, doors unlock (if connected), and the park
ملخص المحتوى في الصفحة رقم 14
Advanced Commands: (Level 2) Press and release the button 2 times. The and aux LED’s illumi- nate indicating Level 2 Note: The transmit LED on the 1-way remote will flash in groups of 2 to indicate level 2. Sensor Bypass Press and release Performing the sensor bypass command will incrementally bypass sen- sor operations and be confirmed as follows: Warn-away Bypass: The parking lights flash 2 times. The arm LED, 1 beep and 1 fault tone play to confirm. Sensors will be activated for full trigg
ملخص المحتوى في الصفحة رقم 15
off accordingly. The disarm LED and valet beeps play (1 for on, 2 for off) to confirm. AUX 2 Press and release AUX Activates (or if on, deactivates) the aux 2 output. The aux LED and on tones or off tones play to confirm. Arm Status Press and hold the button The remote will generate an output to display the systems arm status since its last update message or command operation. It will report status via ghost LED’s, beeps, and tones as described in this section for arm, disarm, valet mode arm,
ملخص المحتوى في الصفحة رقم 16
Advanced Commands: (Level 3) Press and release the button 3 times. The , aux and rs/aux LED’s illuminate indicating Level 3. Note: The transmit LED on the 1-way remote will flash in groups of 3 to indicate level 3. Sensor Silent Arm* Press and release The alarm arms, doors lock, and the siren chirps and parking lights flash 3 times. The arm LED, 1 beep and 3 fault tones play to con- firm. Car finder Press and release The siren emits one long chirp and the parking lights flash for 10 sec- onds. T
ملخص المحتوى في الصفحة رقم 17
Advanced Commands: (Level 4) Press and release the button 4 times. The , aux, rs/aux and disarm LED’s illuminate indicating Level 4 Note: The transmit LED on the 1-way remote will flash in groups of 4 to indicate level 4. Full Silent Arm* Press and release The alarm arms, doors lock, and the siren chirps and parking lights flash 4 times. The arm LED, 1 beep and 4 fault tones play to con- firm. AUX 4 Press and release AUX Activates (or if on, deactivates) the aux 4 output. The aux LED and on
ملخص المحتوى في الصفحة رقم 18
Remote Control Configuration Remote Programming The Responder LE and 1-way companion remote controls have opera- tions that can be configured to a user’s personal preferences. The fol- lowing instruction will direct you through the available programming options for both remote controls. To enter programming, press and hold the button for 8 seconds, the remote emits one long beep and the transmit LED turns on to indi- cate the main menu is accessed. To exit programming or go back to a previous m
ملخص المحتوى في الصفحة رقم 19
Prepare the remote control Select the desired car 1 (default) or car 2 operation before proceed- ing. 1. Pressand hold the button of the remote control for 8 seconds until the transmit LED turns on, and then release it (If programmed to operate two systems, ignore the Transmit LED flashes at 3 sec- onds). 2. Pressand hold the button until the transmit LED flashes off and on three times. 3. Pressand hold the button until the siren emits one long chirp to confirm Pairing. Note: 2-way rem
ملخص المحتوى في الصفحة رقم 20
Feature Button LED on LED off LED Flash LED Double Press Flash Page Mode AUX Paging On Paging Off Power Power Save1 Save 2 1-way companion remote control The 1-way remote will flash the transmit LED to indicate the setting. Feature Button Press LED on LED off Keypad Lock Auto Off No function No function No function Car 2 Car 2 On Car 2 Off Keypad Lock Options: Off, Auto When off, the buttons do not lock and always perform a command when pressed. When set to auto, the remote buttons lock aft
