Aspire Digital version 1.20 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Aspire System Boot Code Update Instructions
Use the following instructions to update the Aspire system’s boot code. This code provides basic start-up
functionality for the Aspire.
Compatibility
Though the Boot Code version 1.20 can be used with any system software, when used with software 1.21 or
higher, the VRS feature will work with any version of the Aspire NTCPU. With Boot Code prior to 1.20, for
the VRS feature, the NTCPU has to be either:

The 64-Port Basic NTCPU (P/N 0891002) with the F

ملخص المحتوى في الصفحة رقم 2

N2IP Boot [Mar 24 2003 22:44:51] FPGA version : 2B21H SDRAM 64MBytes OK Boot from Memory Card Load Switch : OFF Boot from Memory Card Updating the Boot Flash start updating Boot Flash Updating Sector#0 BFlash::update(): Sector#0, Retry=0 BFlash::update(): Erase BFlash::update(): Program --- continue --- Boot Flash Updating Sector#6 BFlash::update(): Sector#6, Retry=0 BFlash::update(): Same data Boot Flash Update: Successful completed. finished updating correctly 8. Once the update finishes