ملخص المحتوى في الصفحة رقم 12
Editing You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations. 1 Make connections Example: When using this VCR as the playback VCR This VCR (for playback) To audio/video out Audio/video cable (not supplied) To audio/video input Another VCR (for recording) • When using this VCR as the recording VCR, connect this VCR’s audio/video
ملخص المحتوى في الصفحة رقم 13
Before Requesting Service Make sure by first checking the following points. SYMPTOM CAUSE POSSIBLE SOLUTION POWER Connect the AC power cord to the AC The AC power cord is not connected. No power. outlet. Although the power is on, it Cassette is not inserted. Insert a video cassette. does not operate. TV BROADCAST RECEPTION Antenna connection is not correct. Connect it correctly. Antenna cable is disconnected. Reconnect the antenna cable. The video channel is not in the correct Set it to CH 3 or
ملخص المحتوى في الصفحة رقم 14
Specifications GENERAL : AC 110 V-220 V~, 50 Hz/60 Hz Power requirement Power consumption : 10 W Power on : 2.0 W Power off Temperature :5°C to 40°C (41°F to 104°F) Operating : –20°C to 60°C (–4°F to140°F) Storage : Horizontal only Operating position : 360 mm x 95 mm x 224 mm Dimensions (W x H x D) : 3.2 kg Weight : VHS NTSC standard Format Maximum recording time : 210 min. with ST-210 video cassette SP : 630 min. with ST-210 video cassette EP VIDEO/AUDIO : NTSC-type color signal and EIA monochr
ملخص المحتوى في الصفحة رقم 1
VIDEO CASSETTE RECORDER
HR-J6009UM
INSTRUCTIONS
Printed in Thailand
LPT0702-001A K
4F22001A
UM
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
02/01
Dear Customer,
CAUTION
Thank you for purchasing the JVC VHS video cassette recorder.
When you are not using the VCR for a long period of time, it is
Before use, please read the safety information and precautions to
recommended that you disconnect the power cord from the
ensure safe use of your new VCR.
AC outlet.
Dangerous voltage inside. Refer i
ملخص المحتوى في الصفحة رقم 2
When the equipment is installed in a cabinet or a shelf, make sure MOISTURE CONDENSATION that it has sufficient space on all sides to allow for ventilation Moisture in the air will condense on the VCR when you move it (10 cm or more on both sides, on top and at the rear). from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass When discarding batteries, environmental problems must be filled with cold liquid. Moisture condensati
ملخص المحتوى في الصفحة رقم 3
Buttons, Connectors and Indicators Front Panel STOP/EJECT POWER Cassette loading slot CH–/+ REC PLAY PLAY POWER STOP/EJECT REW FF CH VIDEO (MONO) L – AUDIO – R REC Remote sensor REW FF VIDEO/AUDIO input connectors Display Panel One-touch Timer Recording VCR Timer Record ATR (Auto Tracking) Tape In AM/PM Multi-Function Display Rear Panel AC power cord UHF/VHF IN (ANT) UHF/VHF OUT IN(ANT) VIDEO L OUT(TV) AUDIO R AUDIO/VIDEO OUT UHF/VHF OUT (TV) 4F22001AE Cov-07 3 16/01/2002, 19:05
ملخص المحتوى في الصفحة رقم 4
– Buttons, Connectors and Indicators – Remote Connections and VCR channel Setting POWER POWER 1 Check contents Make sure the package contains all of the accessories listed 12 3 in “Specifications”. Number keys 45 6 CH–/+ 2 Situate VCR 7 89 Place the VCR on a stable, horizontal surface. AUX (AUX) – CH + Connect VCR to TV 3 0 PAUSE REC REC PAUSE Antenna or cable PLAY REW PLAY Coaxial cable REW FF FF STOP ENTER Flat feeder MENU ENTER STOP MENU TIMER Matching transformer + – SET (not supplied) CANC
ملخص المحتوى في الصفحة رقم 5
– Connections and VCR channel Setting – Initial Settings 4 Set VCR channel To view playback of a recorded tape, or to watch a program Language Setting MENU selected by the VCR's channel selector, the TV must be set to CLOCK SET The default setting is “ESPAÑOL”. TIMER REC SET channel 3 or 4 (video channel) when a TV is connected with AUTO REPEAT ON OFF CH SET UP the 75 ohm coaxial cable only. 1 Access Menu screen, then SAP ON OFF LANGUAGE/IDIOMA/LANGUE Language screen NO NOISE BACKGROUND 1 Press
ملخص المحتوى في الصفحة رقم 6
– Initial Settings – Tuner Setting Setting channels manually This VCR is equipped with a channel memory feature which – Manual Channel Set allows channels to skip up or down to the next channel set You can add the channels you want or delete the channels into memory, skipping over unwanted channels. Before you do not want manually. selecting channels, they must be programmed into the VCR’s memory. In addition to normal VHF and UHF channels, this MENU 1 Access Menu screen, then CH CLOCK SET VCR c
ملخص المحتوى في الصفحة رقم 7
Playback Slow-motion Press PLAY ( ) on the OR Press Play ( ) on the Basic Playback Remote. VCR. Load a cassette 1 • Playback will proceed at 1/10 th of the normal speed. • Press PLAY ( ) to resume normal playback. PLAY NOTE: POWER STOP/EJECT REW FF During slow motion picture, some noise might appear on CH VIDEO (MONO) L – AUDIO – R REC the TV screen. Use the SET–/+ on the Remote to eliminate the noise. Speed search Make sure the window side is up, the rear label side is facing you and the arrow
ملخص المحتوى في الصفحة رقم 8
– Playback – Playback Features Recording It may be unlawful to record or play back copyrighted Adjusting tracking condition material without the consent of the copyright owner. – Tracking Adjustment Accidental erasure prevention To prevent accidental recording on a recorded Automatic tracking adjustment cassette, remove its record safety tab. Whenever you insert a tape and start playback, automatic To record on it later, cover the hole tracking starts working and continuously analyzes the signal
ملخص المحتوى في الصفحة رقم 9
– Recording – Recording Features Timer Recording Specifying recording length Timer recording can be programmed on-screen with - One Touch Timer Recording (OTR) the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 The One-touch Timer Recording feature provides a month. simple and convenient way to make a timed recording. NOTES: EXAMPLE: One-touch Timer Recording for 30 minutes. • After timer recording is completed, the VCR turns off automatical
ملخص المحتوى في الصفحة رقم 10
– Timer Recordings – IF THE PROGRAM OVERLAPS ANOTHER TO CORRECT THE SETTINGS When setting the Timer Recording, press ENTER until the NOTE: Do not overlap programs as portions of the conflicting programs will be lost. The first desired setting blinks, then re-enter the setting using SET –/+. recording time has priority over the next recording When finished, press ENTER. time as shown in the diagram. NOTES: • The VCR cannot be used while the TIMER REC indicator ( ) is lit. 8 : 00 9 : 00 10 : 00 11
ملخص المحتوى في الصفحة رقم 11
Other Functions Changing display information SEPARATE AUDIO PROGRAM (SAP) Each time you press DISPLAY, the display Your VCR is fitted with an SAP broadcast system which panel shows the time counter and the clock enables you to switch to a SEPARATE AUDIO PROGRAM time alternatively. when viewing a selected channel. • When DISPLAY on the Remote is pressed, This function applies only when the program is time counter will appear on the TV screen. broadcast in multi-languages through the SAP broadcast
