ملخص المحتوى في الصفحة رقم 1
4 CH DVR Quick Installation Guide
MODEL QT17DVR4C
Version: 6214C-P01.010
Package Contents:
1. 1-17" TFT w/built-in 4 Channel MPEG4 DVR
2. 4 - CCD Outdoor Night Vision Cameras
3. 1- Remote control
4. 1- Power Cable
5. 4- BNC Cables (60 foot)
6. 1- USB cable
7. 1- VGA Cable (PC Monitor)
8. 1- Installation CD for Remote Client Program
9. Hard drive (Optional)
10. 1- set key for the hard drive bay
11. Manual
Tech Support:
Website: www.q-see.com click on support.
Email : ts@dpsi-usa
ملخص المحتوى في الصفحة رقم 2
1 Installation: 1. Attach the camera to the BNC connector and the power connection. Push the red connector (1) with long chrome head Line up the slots on the yellow BNC connector (1) with the black tip into the other grey connector(2). with the tabs on the grey connector(2), then push in and turn the head on the yellow connector clockwise to lock it in place. Page 2
ملخص المحتوى في الصفحة رقم 3
1. Connect the other end of the camera cable to the camera's power supply and to the Video IN on the DVR Line up the opennings on the yellow BNC connector (1) Push the connector from the power supply (1) into the with the stubs on the top & bottom of the connection red connector with the short chrome head (2). Plug on the DVR (2), push in and then turn clockwise to power supply into outlet near DVR. lock in place. 2. Make sure the Hard Drive (1) is in the bay (2) and locked. Turn the key
ملخص المحتوى في الصفحة رقم 4
To Record With Your DVR : There are 3 modes for recording. 1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD button again. 2. Motion Detection Recording: This will record only when there is a Motion in front of the camera. 3. Time Schedule Recording: Use this option to record during specific times. To Set Up Motion Detection Recording: Use the remote control and push SETUP, then follow the instructions below: 2. Use the directio
ملخص المحتوى في الصفحة رقم 5
To Set Up Time Schedule Recording: Use the Remote Control and push SETUP and follow the instruction below: 2. Use the directional arrows to select "Setup" 1. Select "Work Set" using the directional arrows and hit ENTER. and hit ENTER 3. Select the first heading under "Week" and use the +/- keys to change setting to "Everyday", then use number pad to set the schedule time, as in the example, from 18:00 (6:00PM) to 8:00 (8:00AM) Make sure that under the "Type" setting yo
ملخص المحتوى في الصفحة رقم 6
To Playback the Recording: 1. Using the remote control, push CHECK 2. Select "All Record" and hit ENTER. Select "All Record" and hit the ENTER button. You can now use the number pad to enter a specific date and time then use the arrow keys to select "Start" and hit the ENTER button. 3. This will bring up a calender and the file you created will be listed at the bottom. Use the arrow keys to select it and hit the ENTER button to playback. To stop playback
ملخص المحتوى في الصفحة رقم 7
To Back Up the files: You can use the USB cable and connect it directly from DVR to USB port on the PC and either copy it your PC hard drive or play it back on your PC 3. Use the directional 2. Use the directional arrows to select 1. Push SETUP on the romote control arrows to select "Open" Use the directional arrows to select "Setup" under "USB Settings". and hit ENTER. Hit ENTER on the remote. "Basic Set". The PC will find the new hardware and will put a new drive lett
ملخص المحتوى في الصفحة رقم 8
To Monitor the Camera on a Remote Computer: Here is the connection diagram: To monitor your camera on a remote computer you need to forward your IP port to the remote computer. There are instructions on how to do this on the website http://www.portforward.com based on the brand and model of router you have. Here is a sample of the port forwarding screen for a Linksys router: Page 8
ملخص المحتوى في الصفحة رقم 9
The QT17DVR4C comes with Remote Client software to allow you to monitor the system, record, and playback through a remote PC through port forwarding. To Install the DVR6214 Remote Client Program: 1. Insert the Remote Client Program CD into the CD/DVD-ROM drive on the computer 2. Double click on the QT17DVR4C folder 3. Double click on the Remote Client Program icon 4. Click on "Next" 5. Click "Next" to accept the default folder location 6. Click "Next" to install the program 7. After Program ins
ملخص المحتوى في الصفحة رقم 10
You can also connect to the DVR using the Internet Explorer web browser by typing your WAN IP & the Web port from the Network Set ( EX: http://75.4.207.211:8100/) on the browser's address bar. You need to allow Pop-ups. To do so go to the Internet Explorer tool bar and select the "tools" option, then select the "Pop up Blocker" option and select "Turn Off Pop-up Blocker". You will also need to enable Active X controls. To do so go to the Internet Explorer tool bar and select the "tools" opti
