Q-See - Digital Peripheral SolutionsQS408 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
QS Series Network DVRs
with H.264 Compression
QS434 - 4 Channel DVR
QS464 - 4 Channel DVR
QS408 - 8 Channel DVR
QS206 - 16 Channel DVR
IMPORTANT! This walkthrough will allow you to test your cameras and connections before you mount them.
Before You Get Started
A: Gather Your Components. B: Unpack the box...
You will need: Check the contents against the items shown in this poster. If you
notice any damage or missing components, please contact Q-See
1. A 19” or larger VGA PC

ملخص المحتوى في الصفحة رقم 2

Connect the Devices STEP 1 Turning on the DVR 1. Connect the power cable to the DVR 2. Connect the power adapter to the power cable. 3a. Plug the power cable into a surge protector b. The QS408 and QS464 have a power switch on the rear panel which must be flipped to the “On” positon. All other models will power up when plugged in. 3a 3a 3b 3b STEP 2 Connect Mouse STEP 3 Connect to a VGA Monitor or Television Plug the mouse into the USB port on the rear of the OPTION A: Connecting a VGA P

ملخص المحتوى في الصفحة رقم 3

Camera Set Up STEP 6 Connecting the Cameras 3. Plug one of the power leads on the power splitter into the power lead on the power and video cable. 1. Connect the BNC and power leads on the camera to the matching connectors on the power and video cable. 4. Repeat for each camera included with this package to ensure proper connection and function. NOTE: The male power end fits into the matching power lead on the camera. 5. Connect the single end of the power splitter to the power adapter. 2. Con