Q-See - Digital Peripheral Solutions9004 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

QR, QSDR, and 9004 Series
1
Port Forwarding Instructions
STEP 1. Select DHCP from the Type
drop-down menu,
STEP 2. Click on APPLY
NOTE! The DVR and PC must be connected to the same router.
2 3
STEP 3. Select EXIT.
STEP 4. Restart the DVR.
UPNP OFF
Things you will need to know :
1. The make and model of the router.
PICTURE 3
2. If you changed the default router login, then you will need to know the user name and
password for that router.
3. The IP address for the router.
Once the DVR has rest

ملخص المحتوى في الصفحة رقم 2

SECTION 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK To find out the number of routers on your network, you will need to download a FREE router STEP 6. If there is only one router detected, then you may skip to Section 3: Simple detection program. Port Forwarding. If Multiple Routers are Detected STEP 1. Go to http://www.pcwintech.com/shanes-toolbox If there are multiple routers, you will see a display similar to Picture 10. STEP 2. Click on Detect Multiple If so, it may be preferab

ملخص المحتوى في الصفحة رقم 3

Click on ADD CUSTOM. SECTION 3: DOWNLOAD SIMPLE PORT FORWARDING PROGRAM Download the FREE Simple Port Forwarding program from: http://www.simpleportforwarding.com/download Click on Download on Mirror 7 to download and install this program. PICTURE 11 Once the program is installed, go to the Windows Start Menu (Windows icon in the lower left of your monitor) and look for Simple Port Forwarding in the program list. PICTURE 14 Click on the program to launch it. Input the required information:

ملخص المحتوى في الصفحة رقم 4

You will now be returned to the main window of the program. The ports you added will now If for some reason, a port or ports that you forwarded are not listed in the Router and if you show on the list. Click on Update Router at the bottom. see a message in the Scripts list on the left side of the window stating that the port already exists (Red box in Picture 18), then you will need to change the Port 80 to 85 in the DVR and start over again. PICTURE 18 Once you receive the DONE message that

ملخص المحتوى في الصفحة رقم 5

Click on Begin. SECTION 4: SETTING UP DMZ IN ROUTER 2 If you receive a message stating that the port is online and can be reached, then you have set NOTE! You will only need to proceed with this section if you detected a it up correctly. second router in Section 2. STEP 1. Login into Router 1 by putting the IP of Router 1 into the Internet Explorer browser, as in the example shown in Picture 21 where the IP address of Router 1 is 192.168.0.1 STEP 2. Find the status page on the router sett