Pelco Tech Tips DX4500/4600 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

USING NO-IP.COM FOR DX4500/4600
WEB ADDRESS
April 10, 2008
T Teech ch Tips
Helpful Tips for Pelco Products
USING NO-IP.COM FOR DDNS ON THE DX45_46 WEB ADDRESS
To change the IP address to a domain name as described in the operation/configuration manual on
page 56, follow the instructions below. If the DVR is installed in a network that has a firewall, port 8245
has to be opened to allow DDNS data to get through the firewall. For information about setting up the
firewall, refer to your network

ملخص المحتوى في الصفحة رقم 2

T Teech ch Tips Helpful Tips for Pelco Products 3. Select a name for Hostname. 4. Under Host Type, choose the option DNS Host (A). 5. Under IP Address, insert current IP Address of the DX45_46 Server. 6. Click the Create Host button. 7. Go Back to DX45-4600 Server and the DX45-4600 Setup Menu. 8. Go to Network. 9. Go to DDNS. 10. When in the DDNS page, enter the username and password log on from No-IP.com. Note: Username is in the form of email address. 11. Click Exit. A prompt will appear sta