LOREX Technology L154P-81 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model: L154P-81 Digital Video Recorder
1) FAQ: What is the hard disk capacity of the L154P-81 DVR?
The L154P-81 is a four channel DVR with an 80 GB Hard Disk Drive installed.
In some DVR’s the 80 GB Hard Disk Drive may be installed in the internal drive bay .
Internal Drive Bay
Accessible through
bottom panel.
Removable Hard Disk
Drive
The internal drive bay is located in the bottom panel of the DVR as referenced above.
The internal drive bay is accessible from the bottom panel of the DVR by

ملخص المحتوى في الصفحة رقم 2

2) FAQ: How do I connect the L154P-81 to a monitor? There are many types of monitors. Setup instructions for two different types of monitors are described: • Connect a slave monitor • Connect a quad monitor (used as a slave monitor) Cameras A. Monitor ‘Slave’ B. Monitor ‘Quad’ Video In DVR Video Out Back of DVR Back of Monitor (not included) Example 1: Connect a slave monitor (typical connection) A slave monitor displays video output and on screen display (OSD) from the DVR. (1) Four camera v

ملخص المحتوى في الصفحة رقم 3

3) FAQ: How do I maintain the camera input to the quad monitor and connect the L154P-81 to the monitor? There are two different ways to connect the monitor to the DVR. Setup instructions for two different types of monitors are provided: • Quad monitor with (looping) video outputs • Quad monitor without (looping) video outputs Example 1: Connect a Quad monitor with (looping) video outputs In this example the quad monitor has individual (looping) video outputs for each channel. Cameras Quad Moni

ملخص المحتوى في الصفحة رقم 4

Example 2: Connect a Quad monitor without (looping) video outputs In this example the quad monitor does not have looping video outputs for each channel. Cameras Back of Monitor (not included) Video/ VCR Out Video In Video/ VCR In DVR Video Out A quad monitor without looping video outputs for each channel should have a video output labeled VCR out To display the recorded video from the DVR on the monitor 1) Connect the VCR output (video output) from the quad monitor to channel 1 video input on