ملخص المحتوى في الصفحة رقم 1
EasyStart
D32XD Main Features
• Intuitive 320x240 tilt-able TouchView display, plus dedicated Effect and EQ knobs
• 16 / 24bit recording / playback @ up to 96kHz, with No Audio Compression
• 56 channel, 14 buss digital mixer (69bit processing)
• Up to 16 track simultaneous recording with optional AIB-8 input board
• 8-XLR inputs w// switchable phantom power, plus 8- ¼ TRS balanced inputs w/26dB pads and
trim – expandable to total 16 inputs
ملخص المحتوى في الصفحة رقم 2
D32XD EasyStart Quick Overview of Modes In this section, you’ll tour some powerful features of the D32XD while working with the 24bit/96k demo song. In the second section, you’ll create your own recording. Complete the first section now, so that you can become familiar with the main features, and get comfortable with navigation. You’ll find the well-designed top panel, TouchView display and dedicated knobs around the display make working with the D32XD a breeze! Transport controls show
ملخص المحتوى في الصفحة رقم 3
D32XD EasyStart 2. Press the [CH VIEW] key select different channels by pressings the [CH SELECT] keys (yellow) above the faders, or press the “CH” in the upper left corner of the display and use the DIAL to change channels. 3. Press the “Ch Routing” tab. Here you can view the signal flow for the selected channel. [TRACK] & [SCRUB] Virtual tracks and Track editing 1. Press the [TRACK] key. This screen displays the currently selected virtual track for each channel. You can name your
ملخص المحتوى في الصفحة رقم 4
D32XD EasyStart 5. Press Automation “OFF” in the upper right of the display to turn it “ON (Rec)” 6. press the [<] [MARK JUMP] to return to to beginning of the song. Press the [ ] key to playback the song and during playback move fader 1 up and down, changing the volume. (channels 1 and 2 are paired, so adjusting channel 1 will also adjust channel 2) When finished press [ ]. 7. Return track automation for channels 1 and 2 to play mode by pressing the “ ” radio buttons under the channels
ملخص المحتوى في الصفحة رقم 5
D32XD EasyStart 2. Press the “InsertEFF” tab then press the [CH SELECT] key for channel 8. While playing the song, make some adjustments to the “Mono Compressor” effect using the four dedicated effect CONTROL knobs just below the Touchview display. 3. Insert a different effect here: Press the “ ” popup button in the upper middle of the display, to bring up the effect catagories. Select the “Modulation&Pitch” category Select “P082:Octave Voice” Press “OK”. (whatever happened to the Chi
ملخص المحتوى في الصفحة رقم 6
D32XD EasyStart Assign an input and apply one of the analog compressors: 1. Make sure that the PAD keys above the TRIM knobs are in the up position, and that the TRIM knob is set all the way left to -12dB. 2. Connect a guitar to the GUITAR IN jack on the front panel. Or.. If you are going to use a microphone, make sure that the PHANTOM power switch for INPUT 1 (located on the back of the unit) is set to OFF, unless your condensor microphone requires phantom power. Then connect your m
ملخص المحتوى في الصفحة رقم 7
D32XD EasyStart 2. Press the “Rhythm On” button in the display press “Prev<))”, and then set the desired tempo. When finished, press to turn “Prev<))” OFF. 3. Press the [METER] key (lower left corner of the display) press the [ ] button (it will blink red), and then press the [ ] button to start recording when finished recording, press [ ] and then press [<] [MARK JUMP] to return to the beginning of the song. 4. Press the red [REC/PLAY] key for Channel 1 so that it changes to green,
ملخص المحتوى في الصفحة رقم 8
D32XD EasyStart Backup your data to computer using USB: The D32XD has a 2GB partition dedicated for file transfers to/from the computer via a USB connection. First, the data must be copied to the 2GB partition, and then that partition can be mounted on your computer desktop. Individual tracks can by transferred as WAV files, or entire songs can be backed up. Now to backup your song… 1. Connect a USB cable from the D32XD to your computer. 2. Press the [SYSTEM] key press the “Backup
